Name:
Tin 97.5% foil 0.0125 mm thickness 300 x 300mm
Synonym:
None
CAS:
7440-31-5
Section 1 - Chemical Product
MSDS Name:Tin 97.5% foil 0.0125 mm thickness 300 x 300mm
Synonym:None
Synonym:None
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7440-31-5 | Tin | 97.5 | 231-141-8 |
| Hazard Symbols: None Listed. Risk Phrases: None Listed. |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Prolonged and/or repeated contact may cause irritation and/or dermatitis. Low hazard for usual industrial handling.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Low hazard for usual industrial handling. Ingested inorganic tin exhibits only moderate toxicity due to poor absorption and rapid tissue turnover. Ingestion of large amounts may cause gastrointestinal irritation, nausea, cramps, vomiting and diarrhea.
May interfere with various enzyme systems. Inorganic tin salts may cause systemic effects on the central nervous system, heart and liver.
Inhalation:
Dust is irritating to the respiratory tract. Inhalation of fumes may cause metal fume fever, which is characterized by flu-like symptoms with metallic taste, fever, chills, cough, weakness, chest pain, muscle pain and increased white blood cell count. When inhaled as a dust or fume, may cause benign pneumoconiosis.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic exposure to tin oxide dusts and fumes may result in stannosis (benign pneumoconiosis).
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Prolonged and/or repeated contact may cause irritation and/or dermatitis. Low hazard for usual industrial handling.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. Low hazard for usual industrial handling. Ingested inorganic tin exhibits only moderate toxicity due to poor absorption and rapid tissue turnover. Ingestion of large amounts may cause gastrointestinal irritation, nausea, cramps, vomiting and diarrhea.
May interfere with various enzyme systems. Inorganic tin salts may cause systemic effects on the central nervous system, heart and liver.
Inhalation:
Dust is irritating to the respiratory tract. Inhalation of fumes may cause metal fume fever, which is characterized by flu-like symptoms with metallic taste, fever, chills, cough, weakness, chest pain, muscle pain and increased white blood cell count. When inhaled as a dust or fume, may cause benign pneumoconiosis.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic exposure to tin oxide dusts and fumes may result in stannosis (benign pneumoconiosis).
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If irritation develops, get medical aid.
Skin:
Get medical aid if irritation develops or persists. Wash clothing before reuse. Flush skin with plenty of soap and water.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Skin:
Get medical aid if irritation develops or persists. Wash clothing before reuse. Flush skin with plenty of soap and water.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid if irritation or symptoms occur.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use extinguishing media appropriate to the surrounding fire. Substance is noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to extinguish surrounding fire. If water is the only media available, use in flooding amounts.
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use extinguishing media appropriate to the surrounding fire. Substance is noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to extinguish surrounding fire. If water is the only media available, use in flooding amounts.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed.
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep containers tightly closed.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 7440-31-5: United States OSHA: 2 mg/m3 TWA Belgium - TWA: 2 mg/m3 VLE Germany: 2 mg/m3 TWA (inhalable fraction) Malaysia: 2 mg/m3 TWA Netherlands: 2 mg/m3 MAC Spain: 2 mg/m3 VLA-ED Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 7440-31-5: United States OSHA: 2 mg/m3 TWA Belgium - TWA: 2 mg/m3 VLE Germany: 2 mg/m3 TWA (inhalable fraction) Malaysia: 2 mg/m3 TWA Netherlands: 2 mg/m3 MAC Spain: 2 mg/m3 VLA-ED Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: silver white
Odor: none reported
pH: Not applicable.
Vapor Pressure: 1 mm Hg @ 1492 deg
Viscosity: Not applicable.
Boiling Point: 2507 deg C
Freezing/Melting Point: 231.9 deg C
Autoignition Temperature: 806 deg F ( 430.00 deg C)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: 0.19
Decomposition Temperature: Not applicable.
Solubility in water: Slightly soluble in hot water.
Specific Gravity/Density: 7.31
Molecular Formula: Sn
Molecular Weight: 118.69
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Halogens, nitric acid, sodium peroxide, sulfur, copper nitrate, hydrochloric acid, tin chloride, potassium peroxide.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, tin/tin oxides.
Hazardous Polymerization: Will not occur.
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat.
Incompatibilities with Other Materials:
Halogens, nitric acid, sodium peroxide, sulfur, copper nitrate, hydrochloric acid, tin chloride, potassium peroxide.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, tin/tin oxides.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7440-31-5: XP7320000 LD50/LC50:
Not available.
Carcinogenicity:
Tin - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
CAS# 7440-31-5: XP7320000 LD50/LC50:
Not available.
Carcinogenicity:
Tin - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 7440-31-5: No information available.
Canada
CAS# 7440-31-5 is listed on Canadas DSL List.
CAS# 7440-31-5 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-31-5 is listed on the TSCA inventory.
