Name:
Tin (II) Bromide
Synonym:
None
CAS:
10031-24-0
Section 1 - Chemical Product
MSDS Name:Tin (II) Bromide
Synonym:None
Synonym:None
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 10031-24-0 | Tin (II) Bromide | ca 100 | 233-087-0 |
| Hazard Symbols: C Risk Phrases: 34 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Light sensitive.Moisture sensitive.Air sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. Exposure to bromides may cause rashes, especially of the face (resembling acne) and boils. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. The toxicological properties of this substance have not been fully investigated. Inorganic tin salts may cause systemic effects on the central nervous system, heart and liver. May cause systemic effects.
Inhalation:
May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. Aspiration may lead to pulmonary edema. May cause systemic effects. Inhalation of bromides may cause irritation of the upper respiratory tract and lung tissue.
Chronic:
Effects may be delayed. Chronic ingestion may cause bromism characterized by disturbances of the central nervous system, skin and digestive tract.
Causes burns.Light sensitive.Moisture sensitive.Air sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. Exposure to bromides may cause rashes, especially of the face (resembling acne) and boils. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. The toxicological properties of this substance have not been fully investigated. Inorganic tin salts may cause systemic effects on the central nervous system, heart and liver. May cause systemic effects.
Inhalation:
May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. Aspiration may lead to pulmonary edema. May cause systemic effects. Inhalation of bromides may cause irritation of the upper respiratory tract and lung tissue.
Chronic:
Effects may be delayed. Chronic ingestion may cause bromism characterized by disturbances of the central nervous system, skin and digestive tract.
Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use dry chemical to fight fire. Use agent most appropriate to extinguish fire. Do NOT get water inside containers.
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use dry chemical to fight fire. Use agent most appropriate to extinguish fire. Do NOT get water inside containers.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Place under an inert atmosphere. Do not get water inside containers.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation. Place under an inert atmosphere. Do not get water inside containers.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Store protected from light. Handle under an inert atmosphere. Store protected from air. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Do not expose to air. Store protected from moisture. Store protected from light. Store under an inert atmosphere.
Wash thoroughly after handling. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed.
Avoid ingestion and inhalation. Store protected from light. Handle under an inert atmosphere. Store protected from air. Do not allow contact with water. Discard contaminated shoes. Keep from contact with moist air and steam.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Do not expose to air. Store protected from moisture. Store protected from light. Store under an inert atmosphere.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 10031-24-0: United Kingdom, WEL - TWA: (listed as tin inorganic compounds): 2 mg/m3 TWA (except SnH4, as Sn) United Kingdom, WEL - STEL: (listed as tin inorganic compounds): mg/m3 STEL (except SnH4, as Sn) United States OSHA: 2 mg/m3 TWA (as Sn) (listed under Tin inorga compounds).
Belgium - TWA: (listed as tin inorganic compounds): 2 mg/m3 VLE ( Sn) Malaysia: (listed as tin inorganic compounds): 2 mg/m3 TWA (as Sn except tin hydride) Netherlands: (listed as tin inorganic compounds): 2 mg/m3 MAC (as Spain: (listed as tin inorganic compounds): 2 mg/m3 VLA-ED (as Sn Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 10031-24-0: United Kingdom, WEL - TWA: (listed as tin inorganic compounds): 2 mg/m3 TWA (except SnH4, as Sn) United Kingdom, WEL - STEL: (listed as tin inorganic compounds): mg/m3 STEL (except SnH4, as Sn) United States OSHA: 2 mg/m3 TWA (as Sn) (listed under Tin inorga compounds).
Belgium - TWA: (listed as tin inorganic compounds): 2 mg/m3 VLE ( Sn) Malaysia: (listed as tin inorganic compounds): 2 mg/m3 TWA (as Sn except tin hydride) Netherlands: (listed as tin inorganic compounds): 2 mg/m3 MAC (as Spain: (listed as tin inorganic compounds): 2 mg/m3 VLA-ED (as Sn Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Crystalline powder
Color: grey
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 620 deg C
Freezing/Melting Point: 232 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: 85.2G/100ML (0C)
Specific Gravity/Density:
Molecular Formula: SnBr2
Molecular Weight: 278.51
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, light, dust generation, moisture, exposure to air, contact with water, excess heat.
Incompatibilities with Other Materials:
Air, moisture, strong bases.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, hydrogen bromide, tin/tin oxides.
Hazardous Polymerization: Has not been reported
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, light, dust generation, moisture, exposure to air, contact with water, excess heat.
Incompatibilities with Other Materials:
Air, moisture, strong bases.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, hydrogen bromide, tin/tin oxides.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 10031-24-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tin (II) Bromide - Not listed by ACGIH, IARC, or NTP.
CAS# 10031-24-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Tin (II) Bromide - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 10031-24-0: No information available.
Canada
CAS# 10031-24-0 is listed on Canadas NDSL List.
CAS# 10031-24-0 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10031-24-0 is listed on the TSCA inventory.
