英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
Tin (II) Chloride Dihydrate
Synonym:
Stannous chloride dihydrate; Stannochlor; Stannous chloride dihydrat
CAS:
10025-69-1
Section 1 - Chemical Product
MSDS Name:Tin (II) Chloride Dihydrate
Synonym:Stannous chloride dihydrate; Stannochlor; Stannous chloride dihydrat
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
10025-69-1 Tin (II) Chloride Dihydrate >98 unlisted
Hazard Symbols: C
Risk Phrases: 22 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. Causes redness and pain. May be harmful if absorbed through the skin.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns. Exposure may cause anemia and other blood abnormalities. May cause headache, nausea, fatigue, and dizziness. Inorganic tin salts may cause systemic effects on the central nervous system, heart and liver.
Inhalation:
Irritation may lead to chemical pneumonitis and pulmonary edema.
Causes chemical burns to the respiratory tract. May cause effects similar to those described for ingestion. May be harmful if inhaled.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. May cause liver and kidney damage. Adverse reproductive effects have been reported in animals. Chronic exposure may cause effects similar to those of acute exposure.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to extinguish surrounding fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Minimize dust generation and accumulation. Keep container tightly closed. Do not get on skin or in eyes. Do not ingest or inhale. Use with adequate ventilation. Discard contaminated shoes.
Storage:
Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area. Store protected from moisture.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 10025-69-1: United Kingdom, WEL - TWA: (listed as tin inorganic compounds): 2 mg/m3 TWA (except SnH4, as Sn) United Kingdom, WEL - STEL: (listed as tin inorganic compounds): mg/m3 STEL (except SnH4, as Sn) United States OSHA: 2 mg/m3 TWA (as Sn) (listed under Tin inorga compounds).
Belgium - TWA: (listed as tin inorganic compounds): 2 mg/m3 VLE ( Sn) Malaysia: (listed as tin inorganic compounds): 2 mg/m3 TWA (as Sn except tin hydride) Netherlands: (listed as tin inorganic compounds): 2 mg/m3 MAC (as Spain: (listed as tin inorganic compounds): 2 mg/m3 VLA-ED (as Sn Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: colorless to white
Odor: odorless
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: decomposes
Freezing/Melting Point: 100 deg F
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: decomposes in water
Specific Gravity/Density: 2.7
Molecular Formula: SnCl2.2H2O
Molecular Weight: 225.6228

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. May decompose on exposure to moist air or water. Moisture sensitive.
Conditions to Avoid:
Moisture, heating to decomposition.
Incompatibilities with Other Materials:
Metals, strong oxidizing agents, strong reducing agents, strong acids, strong bases, bromine trifluoride, ethylene oxide, potassium, hydrogen peroxide, sodium, moisture, calcium carbide, hydrazine hydrate, organic nitrates.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, tin/tin oxides.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 10025-69-1: XP8850000 LD50/LC50:
CAS# 10025-69-1: Oral, rat: LD50 = 2274.6 mg/kg.
Oral, rat: LD50 = 700 Carcinogenicity:
Tin (II) Chloride Dihydrate - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3260
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3260
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3260
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 10025-69-1: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 10025-69-1 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 10025-69-1 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).