英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
Tin(II) Fluoride 99%
Synonym:
Stannous Fluoride; Tin Difluoride
CAS:
7783-47-3
Section 1 - Chemical Product
MSDS Name:Tin(II) Fluoride 99%
Synonym:Stannous Fluoride; Tin Difluoride
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
7783-47-3 Tin(II) Fluoride 100 231-999-3
Hazard Symbols: C
Risk Phrases: 22 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Air sensitive.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Causes eye burns. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
Harmful if swallowed. May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. Ingestion of large amounts of fluoride may cause salivation, nausea, vomiting, abdominal pain, fever, labored breathing. Inorganic fluorides can be harmful. Acute exposure to fluorine compounds can lead to digestive tract burns, and abdominal pain. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause systemic effects. Exposure to the mist and vapor may erode exposed teeth.
Chronic:
Repeated exposure may cause erosion of teeth. Effects may be delayed. Chronic exposure to fluoride compounds may cause systemic toxicity.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Store protected from air. Wash clothing before reuse.
Discard contaminated shoes. Keep from contact with moist air and steam.
Storage:
Keep refrigerated. (Store below 4C/39F.) Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Do not expose to air. Store protected from moisture. Store under an inert atmosphere. Stannous fluoride ability to release fluoride was related to age and storage temperature.
Losses of soluble fluoride of about 40% in 30 weeks at room temperature indicate that cold storage should be used.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 7783-47-3: Russia: 1 mg/m3 TWA Russia: 0.2 mg/m3 STEL Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Crystalline powder
Color: white
Odor: none reported
pH: 2.8-3.5 (4% aq soln)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 850 deg C
Freezing/Melting Point: 213 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: 4.57 @ 25C
Molecular Formula: SnF2
Molecular Weight: 156.6868

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Air sensitive. Moisture sensitive. Stannous fluoride ability to release fluoride was related to age and storage temperature. Losses of soluble fluoride of about 40% in 30 weeks at room temperature indicate that cold storage should be used.
Conditions to Avoid:
Incompatible materials, dust generation, exposure to air, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents, acids, alkaline solutions, chlorine, turpentine, The reaction with Chlorine and Stannous Fluoride occurs with flaming..
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, fluoride fumes, fluorine.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7783-47-3: XQ3450000 LD50/LC50:
CAS# 7783-47-3: Oral, mouse: LD50 = 184 mg/kg; Oral, rat: LD50 = 360 mg/kg.
Carcinogenicity:
Tin(II) Fluoride - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Pseudomonas putida:
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, N.O.S.*
Hazard Class: 8
UN Number: 1759
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, N.O.S.
Hazard Class: 8
UN Number: 1759
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7783-47-3: No information available.
Canada
CAS# 7783-47-3 is listed on Canadas DSL List.
CAS# 7783-47-3 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7783-47-3 is listed on the TSCA inventory.