Name:
Titanium(III) chloride Al reduced 98%
Synonym:
None
CAS:
12003-13-3
Section 1 - Chemical Product
MSDS Name:Titanium(III) chloride Al reduced 98%
Synonym:None
Synonym:None
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 12003-13-3 | Titanium(III) chloride | 98 | 234-421-8 |
| Hazard Symbols: C Risk Phrases: 14 34 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Reacts violently with water. Causes burns.Air sensitive.Water-reactive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. The toxicological properties of this substance have not been fully investigated.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated.
Chronic:
Chronic exposure may cause effects similar to those of acute exposure.
Reacts violently with water. Causes burns.Air sensitive.Water-reactive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. The toxicological properties of this substance have not been fully investigated.
Inhalation:
Causes chemical burns to the respiratory tract. The toxicological properties of this substance have not been fully investigated.
Chronic:
Chronic exposure may cause effects similar to those of acute exposure.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. If water-reactive products are embedded in the skin, no water should be applied. The embedded products should be covered with a light oil.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. If water-reactive products are embedded in the skin, no water should be applied. The embedded products should be covered with a light oil.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water Reactive. Material will react with water and may release a flammable and/or toxic gas. May ignite or explode on contact with steam or moist air. May re-ignite after fire is extinguished.
Extinguishing Media:
Use dry sand or earth to smother fire. Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER! Contact professional fire-fighters immediately.
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water Reactive. Material will react with water and may release a flammable and/or toxic gas. May ignite or explode on contact with steam or moist air. May re-ignite after fire is extinguished.
Extinguishing Media:
Use dry sand or earth to smother fire. Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER! Contact professional fire-fighters immediately.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Do not expose spill to water. Cover with dry earth, dry sand, or other non-combustible material followed with plastic sheet to minimize spreading and contact with water.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Do not expose spill to water. Cover with dry earth, dry sand, or other non-combustible material followed with plastic sheet to minimize spreading and contact with water.
Section 7 - HANDLING and STORAGE
Handling:
Do not allow water to get into the container because of violent reaction. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store in a tightly closed container. Keep away from water. Corrosives area. Storage under a nitrogen blanket has been recommended.
Do not allow water to get into the container because of violent reaction. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Use only in a chemical fume hood. Discard contaminated shoes. Keep from contact with moist air and steam.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Store in a tightly closed container. Keep away from water. Corrosives area. Storage under a nitrogen blanket has been recommended.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 12003-13-3: United Kingdom, WEL - TWA: (listed as aluminum, soluble salts): 2 mg/m3 TWA United Kingdom, WEL - STEL: (listed as aluminum, soluble salts): mg/m3 STEL Belgium - TWA: (listed as aluminum, soluble salts): 2 mg/m3 VLE ( Al) France - VME: (listed as aluminum, soluble salts): 2 mg/m3 VME Germany: (listed as aluminum, soluble salts): 2 mg/m3 VME Malaysia: (listed as aluminum, soluble salts): 2 mg/m3 TWA (as Al Spain: (listed as aluminum, soluble salts): 2 mg/m3 VLA-ED (as Al Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Use explosion-proof ventilation equipment. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 12003-13-3: United Kingdom, WEL - TWA: (listed as aluminum, soluble salts): 2 mg/m3 TWA United Kingdom, WEL - STEL: (listed as aluminum, soluble salts): mg/m3 STEL Belgium - TWA: (listed as aluminum, soluble salts): 2 mg/m3 VLE ( Al) France - VME: (listed as aluminum, soluble salts): 2 mg/m3 VME Germany: (listed as aluminum, soluble salts): 2 mg/m3 VME Malaysia: (listed as aluminum, soluble salts): 2 mg/m3 TWA (as Al Spain: (listed as aluminum, soluble salts): 2 mg/m3 VLA-ED (as Al Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Powder
Color: purple
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts
Specific Gravity/Density:
Molecular Formula: AlCl12Ti3
Molecular Weight: 596.12
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Combines vigorously or explosively with water. Air sensitive.
Material hydrolyzes in contact with moisture/water releasing toxic and corrosive fumes of hydrogen chloride and aqueous hydrochloric acid.
Conditions to Avoid:
Exposure to air, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents, active metals, alcohols, water.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, aluminum oxide, titanium/titanium oxides.
Hazardous Polymerization: Will not occur.
Combines vigorously or explosively with water. Air sensitive.
Material hydrolyzes in contact with moisture/water releasing toxic and corrosive fumes of hydrogen chloride and aqueous hydrochloric acid.
Conditions to Avoid:
Exposure to air, exposure to moist air or water.
Incompatibilities with Other Materials:
Oxidizing agents, active metals, alcohols, water.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, aluminum oxide, titanium/titanium oxides.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 12003-13-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Titanium(III) chloride - Not listed by ACGIH, IARC, or NTP.
CAS# 12003-13-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Titanium(III) chloride - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: WATER-REACTIVE SOLID, CORROSIVE, N.O.S.
Hazard Class: 4.3
UN Number: 3131
Packing Group: II
IMO
Shipping Name: WATER-REACTIVE SOLID, CORROSIVE, N.O.S.
Hazard Class: 4.3
UN Number: 3131
Packing Group: II
RID/ADR
Shipping Name: WATER-REACTIVE SOLID, CORROSIVE, N.O.S.
Hazard Class: 4.3
UN Number: 3131
Packing group: II
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 14 Reacts violently with water.
R 34 Causes burns.
Safety Phrases:
S 8 Keep container dry.
S 25 Avoid contact with eyes.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 12003-13-3: 1
Canada
CAS# 12003-13-3 is listed on Canadas NDSL List.
CAS# 12003-13-3 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 12003-13-3 is listed on the TSCA inventory.
