Name:
Toluene 90%/ Dichloroacetic acid 10%
Synonym:
None Known
CAS:
79-36-7
Section 1 - Chemical Product
MSDS Name:Toluene 90%/ Dichloroacetic acid 10%
Synonym:None Known
Synonym:None Known
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 79-36-7 | Dichloroacetic acid | 10.0% | 201-199-9 |
| Hazard Symbols: F C Risk Phrases: 11 34 20 63 67 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Highly flammable. Causes burns. Harmful by inhalation. Possible risk of harm to the unborn child. Vapours may cause drowsiness and dizziness.
Potential Health Effects
Eye:
Causes eye burns. May result in corneal injury.
Skin:
Causes skin burns. May be absorbed through the skin. May cause dermatitis.
Ingestion:
Aspiration hazard. Causes gastrointestinal tract burns. May cause effects similar to those for inhalation exposure. Aspiration of material into the lungs may cause chemical pneumonitis, which may be fatal.
Inhalation:
Inhalation of high concentrations may cause central nervous system effects characterized by nausea, headache, dizziness, unconsciousness and coma. May cause liver and kidney damage. Causes chemical burns to the respiratory tract. Vapors may cause dizziness or suffocation.
Overexposure may cause dizziness, tremors, restlessness, rapid heart beat, increased blood pressure, hallucinations, acidosis, kidney failure.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. May cause cardiac sensitization and severe heart abnormalities. May cause liver and kidney damage. Chronic exposure may cause effects similar to those of acute exposure.
Highly flammable. Causes burns. Harmful by inhalation. Possible risk of harm to the unborn child. Vapours may cause drowsiness and dizziness.
Potential Health Effects
Eye:
Causes eye burns. May result in corneal injury.
Skin:
Causes skin burns. May be absorbed through the skin. May cause dermatitis.
Ingestion:
Aspiration hazard. Causes gastrointestinal tract burns. May cause effects similar to those for inhalation exposure. Aspiration of material into the lungs may cause chemical pneumonitis, which may be fatal.
Inhalation:
Inhalation of high concentrations may cause central nervous system effects characterized by nausea, headache, dizziness, unconsciousness and coma. May cause liver and kidney damage. Causes chemical burns to the respiratory tract. Vapors may cause dizziness or suffocation.
Overexposure may cause dizziness, tremors, restlessness, rapid heart beat, increased blood pressure, hallucinations, acidosis, kidney failure.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. May cause cardiac sensitization and severe heart abnormalities. May cause liver and kidney damage. Chronic exposure may cause effects similar to those of acute exposure.
Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Possible aspiration hazard. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Causes cardiac sensitization to endogenous catelcholamines which may lead to cardiac arrhythmias. Do NOT use adrenergic agents such as epinephrine or pseudoepinephrine.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Possible aspiration hazard. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Causes cardiac sensitization to endogenous catelcholamines which may lead to cardiac arrhythmias. Do NOT use adrenergic agents such as epinephrine or pseudoepinephrine.
Section 5 - FIRE FIGHTING MEASURES
General Information:
Containers can build up pressure if exposed to heat and/or fire. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Water runoff can cause environmental damage. Dike and collect water used to fight fire. Vapors may form an explosive mixture with air. Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Flammable Liquid.
Can release vapors that form explosive mixtures at temperatures above the flashpoint. Use water spray to keep fire-exposed containers cool.
Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water. For small fires, use dry chemical, carbon dioxide, water spray or regular foam. Cool containers with flooding quantities of water until well after fire is out. For large fires, use water spray, fog or regular foam.
Containers can build up pressure if exposed to heat and/or fire. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Water runoff can cause environmental damage. Dike and collect water used to fight fire. Vapors may form an explosive mixture with air. Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Flammable Liquid.
Can release vapors that form explosive mixtures at temperatures above the flashpoint. Use water spray to keep fire-exposed containers cool.
Water may be ineffective. Material is lighter than water and a fire may be spread by the use of water. Vapors may be heavier than air.
They can spread along the ground and collect in low or confined areas. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water. For small fires, use dry chemical, carbon dioxide, water spray or regular foam. Cool containers with flooding quantities of water until well after fire is out. For large fires, use water spray, fog or regular foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust.
Provide ventilation. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust.
Provide ventilation. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Ground and bond containers when transferring material. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Wash thoroughly after handling. Ground and bond containers when transferring material. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Use only under a chemical fume hood.
Exposure Limits CAS# 79-36-7: CAS# 108-88-3: United Kingdom, WEL - TWA: 50 ppm TWA; 191 mg/m3 TWA United Kingdom, WEL - STEL: 150 ppm STEL; 574 mg/m3 STEL United States OSHA: 200 ppm TWA; 300 ppm Ceiling Belgium - TWA: 50 ppm VLE; 191 mg/m3 VLE France - VME: 100 ppm VME; 375 mg/m3 VME France - VLE: 150 ppm VLE; 550 mg/m3 VLE Germany: 50 ppm TWA; 190 mg/m3 TWA Germany: Skin absorber Japan: 50 ppm OEL; 188 mg/m3 OEL Malaysia: 50 ppm TWA; 188 mg/m3 TWA Netherlands: 40 ppm MAC; 150 mg/m3 MAC Russia: 50 mg/m3 TWA Spain: 50 ppm VLA-ED; 191 mg/m3 VLA-ED Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Use only under a chemical fume hood.
Exposure Limits CAS# 79-36-7: CAS# 108-88-3: United Kingdom, WEL - TWA: 50 ppm TWA; 191 mg/m3 TWA United Kingdom, WEL - STEL: 150 ppm STEL; 574 mg/m3 STEL United States OSHA: 200 ppm TWA; 300 ppm Ceiling Belgium - TWA: 50 ppm VLE; 191 mg/m3 VLE France - VME: 100 ppm VME; 375 mg/m3 VME France - VLE: 150 ppm VLE; 550 mg/m3 VLE Germany: 50 ppm TWA; 190 mg/m3 TWA Germany: Skin absorber Japan: 50 ppm OEL; 188 mg/m3 OEL Malaysia: 50 ppm TWA; 188 mg/m3 TWA Netherlands: 40 ppm MAC; 150 mg/m3 MAC Russia: 50 mg/m3 TWA Spain: 50 ppm VLA-ED; 191 mg/m3 VLA-ED Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Clear liquid
Color: colorless
Odor: benzene-like
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: 896 deg F ( 480.00 deg C)
Flash Point: 7 deg C ( 44.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble.
Specific Gravity/Density: Not available.
Molecular Formula: Solution
Molecular Weight: 0
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Ntrogen tetroxide, nitric acid + sulfuric acid, silver perchlorate, strong oxidizers, sodium dilfuoride.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat.
Incompatibilities with Other Materials:
Ntrogen tetroxide, nitric acid + sulfuric acid, silver perchlorate, strong oxidizers, sodium dilfuoride.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 79-36-7: AO6650000 CAS# 108-88-3: XS5250000 LD50/LC50:
CAS# 79-36-7: Draize test, rabbit, skin: 2 mg/24H Severe; Oral, rat: LD50 = 2460 mg/kg; Skin, rabbit: LD50 = 650 uL/kg.
CAS# 108-88-3: Draize test, rabbit, eye: 870 ug Mild; Draize test, rabbit, eye: 2 mg/24H Severe; Draize test, rabbit, skin: 435 mg Mild; Draize test, rabbit, skin: 500 mg Moderate; Draize test, rabbit, skin: 20 mg/24H Moderate; Inhalation, mouse: LC50 = 400 ppm/24H; Inhalation, mouse: LC50 = 30000 mg/m3/2H; Inhalation, mouse: LC50 = 19900 mg/m3/7H; Inhalation, mouse: LC50 = 10000 mg/m3; Inhalation, rat: LC50 = 49 gm/m3/4H; Oral, rat: LD50 = 636 mg/kg; Skin, rabbit: LD50 = 14100 uL/kg.
Carcinogenicity:
Dichloroacetic acid - Not listed by ACGIH, IARC, or NTP.
Toluene - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
CAS# 79-36-7: AO6650000 CAS# 108-88-3: XS5250000 LD50/LC50:
CAS# 79-36-7: Draize test, rabbit, skin: 2 mg/24H Severe; Oral, rat: LD50 = 2460 mg/kg; Skin, rabbit: LD50 = 650 uL/kg.
CAS# 108-88-3: Draize test, rabbit, eye: 870 ug Mild; Draize test, rabbit, eye: 2 mg/24H Severe; Draize test, rabbit, skin: 435 mg Mild; Draize test, rabbit, skin: 500 mg Moderate; Draize test, rabbit, skin: 20 mg/24H Moderate; Inhalation, mouse: LC50 = 400 ppm/24H; Inhalation, mouse: LC50 = 30000 mg/m3/2H; Inhalation, mouse: LC50 = 19900 mg/m3/7H; Inhalation, mouse: LC50 = 10000 mg/m3; Inhalation, rat: LC50 = 49 gm/m3/4H; Oral, rat: LD50 = 636 mg/kg; Skin, rabbit: LD50 = 14100 uL/kg.
Carcinogenicity:
Dichloroacetic acid - Not listed by ACGIH, IARC, or NTP.
Toluene - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Pseudomonas putida:
Fish: Pseudomonas putida:
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S. (TOLUENE MIXTURE)
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S. (TOLUENE MIXTURE)
Hazard Class: 3
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S. (TOLUENE MIXTURE)
Hazard Class: 3
UN Number: 1993
Packing group: II
USA RQ: CAS# 108-88-3: 1000 lb final RQ; 454 kg final RQ
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 11 Highly flammable.
R 20 Harmful by inhalation.
R 34 Causes burns.
R 63 Possible risk of harm to the unborn child.
R 67 Vapours may cause drowsiness and dizziness.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 16 Keep away from sources of ignition - No
smoking.
S 25 Avoid contact with eyes.
S 29 Do not empty into drains.
S 33 Take precautionary measures against static
discharges.
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 79-36-7: 1
CAS# 108-88-3: 2
Canada
CAS# 79-36-7 is listed on Canadas DSL List.
CAS# 108-88-3 is listed on Canadas DSL List.
CAS# 79-36-7 is listed on Canadas Ingredient Disclosure List.
CAS# 108-88-3 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 79-36-7 is listed on the TSCA inventory.
CAS# 108-88-3 is listed on the TSCA inventory.
