Name:
Zirconium powder 200 micron - 70 mesh 99.9%
Section 1 - Chemical Product
MSDS Name:Zirconium powder 200 micron - 70 mesh 99.9%
Synonym:
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# | Chemical Name | emsds | EINECS# |
7440-67-7 | Zirconium powder | | 231-176-9 |
Hazard Symbols: F Risk Phrases: 15 17 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Contact with water liberates extremely flammable gases.
Spontaneously flammable in air.Air sensitive.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. May be harmful if inhaled.
Chronic:
Not available.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Extremely flammable. Material will readily ignite at room temperature. Contact with water liberates highly flammable gases.
Extinguishing Media:
Do NOT use carbon dioxide. Use approved class D extinguishing agents or smother with dry sand, clay, or sodium bicarbonate. DO NOT USE WATER!
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Remove all sources of ignition. Use a spark-proof tool.
Section 7 - HANDLING and STORAGE
Handling:
Use spark-proof tools and explosion proof equipment. Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes. Use and store under argon. Use only in a chemical fume hood.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry place. Store in a tightly closed container.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 7440-67-7: United States OSHA: 5 mg/m3 TWA Belgium - TWA: 5 mg/m3 VLE Belgium - STEL: 10 mg/m3 VLE Germany: 1 mg/m3 TWA (inhalable fraction) Malaysia: 5 mg/m3 TWA Netherlands: 5 mg/m3 MAC Russia: 6 mg/m3 TWA Spain: 5 mg/m3 VLA-ED Spain: 10 mg/m3 VLA-EC Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Powder
Color: black
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 5050 deg C
Freezing/Melting Point: 1900 deg C
Autoignition Temperature: 20 deg C ( 68.00 deg F)
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: Zr
Molecular Weight: 91.22
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to air.
Incompatibilities with Other Materials:
Water, strong oxidizing agents, strong acids, hydrogen fluoride, phosphorus, oxygen, lead, lead oxide, potassium chlorates, potassium nitrate, borax, dichromates.
Hazardous Decomposition Products:
Not available.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7440-67-7: ZH7070000 LD50/LC50:
Not available.
Carcinogenicity:
Zirconium powder - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: Zirconium powder, dry
Hazard Class: 4.2
UN Number: 2008
Packing Group: 2
IMO
Shipping Name: Zirconium powder, dry
Hazard Class: 4.2
UN Number: 2008
Packing Group: 2
RID/ADR
No information available.
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 15 Contact with water liberates extremely
flammable gases.
R 17 Spontaneously flammable in air.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 43E In case of fire, use dry sand (never use
water).
WGK (Water Danger/Protection)
CAS# 7440-67-7: No information available.
Canada
CAS# 7440-67-7 is listed on Canadas DSL List.
CAS# 7440-67-7 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-67-7 is listed on the TSCA inventory.