英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
1 1-Dimethoxyethane 95% (gc)
Synonym:
Acetaldehydedimethylacetal; Dimethyl aldehyde; Ethylidene dimethyl ether; Methyl formy
CAS:
534-15-6
Section 1 - Chemical Product
MSDS Name:1 1-Dimethoxyethane 95% (gc)
Synonym:Acetaldehydedimethylacetal; Dimethyl aldehyde; Ethylidene dimethyl ether; Methyl formy
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
534-15-6 1,1-dimethoxyethane 95.0 208-589-8
Hazard Symbols: F
Risk Phrases: 11

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Highly flammable.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. May cause central nervous system depression, characterized by excitement, followed by headache, dizziness, drowsiness, and nausea. Advanced stages may cause collapse, unconsciousness, coma and possible death due to respiratory failure.
Inhalation:
May cause respiratory tract irritation. May cause narcotic effects in high concentration.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Flammable liquid and vapor.
Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Vapors may form an explosive mixture with air. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use foam, dry chemical, or carbon dioxide. For large fires, use water spray, fog or alcohol-resistant foam. Do NOT use straight streams of water. For small fires, use carbon dioxide, dry chemical, dry sand, or alcohol-resistant foam. Cool containers with flooding quantities of water until well after fire is out.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits CAS# 534-15-6: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear, colorless
Odor: aromatic odor
pH: Not available.
Vapor Pressure: 6.62 KPa @ 0 deg C
Viscosity: Not available.
Boiling Point: 79 deg C
Freezing/Melting Point: -113 deg C
Autoignition Temperature: 202 deg C ( 395.60 deg F)
Flash Point: -2 deg C ( 28.40 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Slightly soluble.
Specific Gravity/Density: .8500g/cm3
Molecular Formula: C4H10O2
Molecular Weight: 90.12

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, strong oxidants.
Incompatibilities with Other Materials:
Acids (mineral, non-oxidizing, e.g. hydrochloric acid, hydrofluoric acid, muriatic acid, phosphoric acid), acids (mineral, oxidizing, e.g. chromic acid, hypochlorous acid, nitric acid, sulfuric acid), alcohols and glycols (e.g. butyl alcohol, ethanol, methanol, ethylene glycol), aldehydes (e.g. acetaldehyde, acrolein, chloral hydrate, formaldehyde), amines (aliphatic and aromatic, e.g. dimethyl amine, propylamine, pyridine, triethylamine), azo, diazo, and hydrazines (e.g. dimethyl hydrazine, hydrazine, methyl hydrazine), carbamates (e.g. carbanolate, carbofuran), cyanides (e.g. potassium cyanide, sodium cyanide), dithiocarbamates (e.g. ferbam, maneb, metham, thiram), esters (e.g. butyl acetate, ethyl acetate, propyl formate), halogenated organics (e.g. dibromoethane, hexachlorobenzene, methyl chloride, trichloroethylene), isocyanates (e.g. methyl isocyanate), ketones (e.g. acetone, acetophenone, MEK, MIBK), mercaptans and other organic sulfides (e.g. butyl mercaptan, carbon disulfide, methanethiol), metals (alkali and alkaline, e.g.
cesium, potassium, sodium), metals as powders (e.g. hafnium, raney nickel), metals and metal compounds (toxic, e.g. beryllium, lead acetate, nickel carbonyl, tetraethyl lead), nitrides (e.g. potassium nitride, sodium nitride), nitriles (e.g. acetonitrile, methyl cyanide), hydrocarbons (aliphatic, unsaturated, e.g. cyclopentene, ethylene, heptene), phenols and cresols (e.g. carbolic acid, creosote, cresol, phenol, resorcinol), organophosphates, phosphothioates (e.g. methylparathion, parathion, phorate, thionazin), sulfides (inorganic, e.g. ferric sulfide, lead sulfide, sodium sulfide), epoxides (e.g. butyl glycidyl ether), combustible and flammable materials (e.g. alkyl resins, asphalt, gasoline, grease, methyl acetone, polystyrene, polyurethane), explosives (e.g.
ammonium nitrate, hydrazoic acid, sodium azide), polymerizable compounds (e.g. butadiene, methyl acrylate, styrene, vinyl chloride), oxidizing agents (strong, e.g. bromine, hydr.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 534-15-6: AB2825000 LD50/LC50:
CAS# 534-15-6: Inhalation, rat: LC50 = 3000 ppm/4H; Oral, rabbit: LD50 = 4507 mg/kg; Oral, rat: LD50 = 6500 mg/kg; Skin, rabbit: LD50 = 20 gm/kg.
Carcinogenicity:
1,1-dimethoxyethane - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: 1,1-DIMETHOXYETHANE
Hazard Class: 3
UN Number: 2377
Packing Group: II
IMO
Shipping Name: 1,1-DIMETHOXYETHANE
Hazard Class: 3.2
UN Number: 2377
Packing Group: II
RID/ADR
Shipping Name: 1,1-DIMETHOXYETHANE
Hazard Class: 3
UN Number: 2377
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 534-15-6: 2
Canada
CAS# 534-15-6 is listed on Canadas DSL List.
CAS# 534-15-6 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 534-15-6 is listed on the TSCA inventory.