英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
1-Bromobutane 99+%
Synonym:
1-Bromobutane
CAS:
109-65-9
Section 1 - Chemical Product
MSDS Name:1-Bromobutane 99+%
Synonym:1-Bromobutane
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
109-65-9 BUTYL BROMIDE >99% 203-691-9
Hazard Symbols: F
Risk Phrases: 11

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Highly flammable.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. May cause conjunctivitis.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors can travel to a source of ignition and flash back. Flammable Liquid. Can release vapors that form explosive mixtures at temperatures above the flashpoint.
Extinguishing Media:
For small fires, use water spray, dry chemical, carbon dioxide or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Wear a self contained breathing apparatus and appropriate personal protection. (See Exposure Controls, Personal Protection section).
Scoop up with a nonsparking tool, then place into a suitable container for disposal. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with skin and eyes. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid ingestion and inhalation. Do not ingest or inhale.
Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear slightly yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: 40 mm Hg @ 25 C
Viscosity: Not available.
Boiling Point: 100.0 - 104.0 deg C @ 760.00mm Hg
Freezing/Melting Point: - 112.00 - - 0.00 deg
Autoignition Temperature: 265 deg C ( 509.00 deg F)
Flash Point: 13 deg C ( 55.40 deg F)
Explosion Limits, lower: 2.60 vol %
Explosion Limits, upper: 6.60 vol %
Decomposition Temperature:
Solubility in water: 0.608 g/l (30 c)
Specific Gravity/Density: 1.2760g/cm3
Molecular Formula: C4H9Br
Molecular Weight: 137.02

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, magnesium, sodium, potassium.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, hydrogen bromide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 109-65-9: EJ6225000 LD50/LC50:
CAS# 109-65-9: Inhalation, mouse: LC50 = 25000 mg/m3/2H; Inhalation, rat: LC50 = 47000 mg/m3/2H; Oral, rat: LD50 = 2761 mg/kg.
Carcinogenicity:
BUTYL BROMIDE - Not listed by ACGIH, IARC, or NTP.
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: 1-BROMOBUTANE
Hazard Class: 3
UN Number: 1126
Packing Group: II
IMO
Shipping Name: 1-BROMOBUTANE
Hazard Class: 3.2
UN Number: 1126
Packing Group: II
RID/ADR
Shipping Name: 1-BROMOBUTANE
Hazard Class: 3
UN Number: 1126
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
WGK (Water Danger/Protection)
CAS# 109-65-9: 2
United Kingdom Occupational Exposure Limits

United Kingdom Maximum Exposure Limits

Canada
CAS# 109-65-9 is listed on Canadas DSL List.
CAS# 109-65-9 is listed on Canadas Ingredient Disclosure List.
Exposure Limits
CAS# 109-65-9: OEL-RUSSIA:STEL 0.3 mg/m3;Skin
US FEDERAL
TSCA
CAS# 109-65-9 is listed on the TSCA inventory.