Synonym:
Lauryl mercaptan; Dodecyl mercaptan; 1-Dodecyl mercaptan; n-Dodecyl mercaptan
Section 1 - Chemical Product
MSDS Name:1-Dodecanethiol
Synonym:Lauryl mercaptan; Dodecyl mercaptan; 1-Dodecyl mercaptan; n-Dodecyl mercaptan
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 112-55-0 | 1-Dodecanethiol | 98 | 203-984-1 |
Hazard Symbols: XI Risk Phrases: 37/38 41 43 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to respiratory system and skin. Risk of serious damage to eyes. May cause sensitization by skin contact.
Potential Health Effects
Eye:
Causes severe eye irritation and possible injury.
Skin:
Causes skin irritation. May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
Repeated exposure may cause sensitization dermatitis.
Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with soap and plenty of water. Remove contaminated clothing and shoes. Get medical aid if symptoms occur. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Combustible liquid and vapor.
Extinguishing Media:
Use water fog, dry chemical, carbon dioxide, or regular foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Remove all sources of ignition.
Provide ventilation. Approach spill from upwind.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Keep away from heat and flame. Avoid breathing vapor or mist. Do not get in eyes. Avoid contact with skin and clothing.
Storage:
Keep away from sources of ignition. Store in a cool, dry place. Keep container closed when not in use.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Exposure Limits CAS# 112-55-0: Personal Protective Equipment Eyes: Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: colorless to light yellow
Odor: skunk-like - repulsive - stench - mild odor - malodo
pH: Not available.
Vapor Pressure: 2.5 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 266-283 deg C @ 760 mm Hg
Freezing/Melting Point: -7 deg C
Autoignition Temperature: 230 deg C ( 446.00 deg F)
Flash Point: 87 deg C ( 188.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 350 deg C
Solubility in water: Insoluble.
Specific Gravity/Density: .8450 g/ml @ 20C
Molecular Formula: C12H26S
Molecular Weight: 202.40
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Ignition sources, excess heat, confined spaces.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 112-55-0: JR3155000 LD50/LC50:
Not available.
Carcinogenicity:
1-Dodecanethiol - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 37/38 Irritating to respiratory system and skin.
R 41 Risk of serious damage to eyes.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 112-55-0: No information available.
Canada
CAS# 112-55-0 is listed on Canadas DSL List.
CAS# 112-55-0 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 112-55-0 is listed on the TSCA inventory.