英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
1-Hexadecylamine straight-chained C16 90%
Synonym:
1-Aminohexadecane; Palmitylamine; 1-Hexadecanamine; 1-Hexadecylamine
CAS:
143-27-1
Section 1 - Chemical Product
MSDS Name:1-Hexadecylamine straight-chained C16 90%
Synonym:1-Aminohexadecane; Palmitylamine; 1-Hexadecanamine; 1-Hexadecylamine
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
143-27-1 1-Hexadecanamine 90 205-596-8
Hazard Symbols: XI
Risk Phrases: 36/37/38

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
May cause severe eye irritation. Causes eye irritation.
Skin:
Causes skin irritation. Amines have been known to cause skin irritation and sensitization. No skin absorption data found.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Material has a low vapor pressure, so exposure to vapor is not likely.
Chronic:
Not available.

Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water.
Remove contaminated clothing and shoes. Get medical aid. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Use with adequate ventilation. Avoid breathing vapor.
Storage:
Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 143-27-1: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: white to pale yellow
Odor: fish-like
pH: Not available.
Vapor Pressure: .0001 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 330 deg C @ 760mmHg
Freezing/Melting Point: 38-47 deg C
Autoignition Temperature: Not available.
Flash Point: 140 deg C ( 284.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: C16H35N
Molecular Weight: 241.46

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong acids, strong oxidizing agents, aluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Will not occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 143-27-1: ML9100000 LD50/LC50:
Not available.
Carcinogenicity:
1-Hexadecanamine - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Amines, Solid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
IMO
Shipping Name: Amines, Solid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing Group: III
RID/ADR
Shipping Name: Amines, Solid, Corrosive, N.O.S.
Hazard Class: 8
UN Number: 3259
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 143-27-1: No information available.
Canada
CAS# 143-27-1 is listed on Canadas DSL List.
CAS# 143-27-1 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 143-27-1 is listed on the TSCA inventory.