英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
2-Hydroxypropyl methacrylate stabilized with 0.11% MEHQ
Synonym:
beta-Hydroxypropyl methacrylate; 2-Hydroxypropyl-2-methyl-2-propenoate
CAS:
923-26-2
Section 1 - Chemical Product
MSDS Name:2-Hydroxypropyl methacrylate stabilized with 0.11% MEHQ
Synonym:beta-Hydroxypropyl methacrylate; 2-Hydroxypropyl-2-methyl-2-propenoate
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
923-26-2 2-Propenoic Acid, 2-Methyl-, 2-Hydroxy 96.5 213-090-3
Hazard Symbols: XI
Risk Phrases: 36 43

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes. May cause sensitization by skin contact.Light sensitive.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Prolonged or repeated skin contact may cause sensitization dermatitis and possible destruction and/or ulceration.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Fire or excessive heat may result in violent rupture of the container due to bulk polymerization.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Use with adequate ventilation. Pure vapor will be uninhibited and may polymerize in vents or other confined spaces.
Storage:
Keep refrigerated. (Store below 4C/39F.) Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Store protected from light.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 923-26-2: Netherlands: 0.05 ppm MAC; 0.24 mg/m3 MAC Personal Protective Equipment Eyes: Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: < 1 mm Hg @ 20 C
Viscosity: Not available.
Boiling Point: 240 deg C
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 101 deg C ( 213.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Slightly soluble in water.
Specific Gravity/Density: 1.03
Molecular Formula: C7H12O3
Molecular Weight: 144.20

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Hazardous polymerization may occur. Contains inhibitor, MEHQ, to prevent polymerization, however its integrity should be checked periodically.
Conditions to Avoid:
Light, excess heat, loss of inhibitor.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, bases.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: May occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 923-26-2: OZ4750000 LD50/LC50:
CAS# 923-26-2: Oral, mouse: LD50 = 7964 mg/kg.
Carcinogenicity:
2-Propenoic Acid, 2-Methyl-, 2-Hydroxypropyl Ester - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36 Irritating to eyes.
R 43 May cause sensitization by skin contact.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 923-26-2: No information available.
Canada
CAS# 923-26-2 is listed on Canadas DSL List.
CAS# 923-26-2 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 923-26-2 is listed on the TSCA inventory.