Name:
2-Methyl-2 4-Pentanediol 99%
Synonym:
Hexylene Glycol; 2,4-Dihdroxy-2-Methylpentane; Diolane; 1,2-Hexanediol; Isol; Pinako
Section 1 - Chemical Product
MSDS Name:2-Methyl-2 4-Pentanediol 99%
Synonym:Hexylene Glycol; 2,4-Dihdroxy-2-Methylpentane; Diolane; 1,2-Hexanediol; Isol; Pinako
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 107-41-5 | 2-Methyl-2,4-pentanediol | 99.0 | 203-489-0 |
Hazard Symbols: XI Risk Phrases: 36/38 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes and skin.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
Causes eye irritation. Causes redness and pain. May cause irritation of the conjunctiva.
Skin:
Causes skin irritation. May cause dermatitis. Causes redness and pain.
Ingestion:
May cause irritation of the digestive tract. Symptoms may include: headache, excitement, fatigue, nausea, vomiting, stupor, and coma.
May cause central nervous system effects. May cause headache, muscle weakness and incoordination, and confusion.
Inhalation:
May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema. May be harmful if inhaled. May cause cough, chest pain, fever, muscular cramps, and headache. Material has a very low vapor pressure and inhalation exposures are not expected unless material is heated or misted.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Combustible liquid and vapor.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water spray, dry chemical, carbon dioxide, or chemical foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Wash area with soap and water. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep away from heat and flame.
Storage:
Keep away from heat and flame. Keep away from sources of ignition.
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 107-41-5: United Kingdom, WEL - TWA: 25 ppm TWA; 123 mg/m3 TWA United Kingdom, WEL - STEL: 25 ppm STEL; 123 mg/m3 STEL Belgium - TWA: 25 ppm VLE; 123 mg/m3 VLE France - VLE: 25 ppm VLE; 125 mg/m3 VLE Germany: 10 ppm TWA; 49 mg/m3 TWA Malaysia: 25 ppm Ceiling; 121 mg/m3 Ceiling Spain: 25 ppm VLA-EC; 123 mg/m3 VLA-EC Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Viscous liquid
Color: clear, colorless
Odor: Mild odor.
pH: 6-8
Vapor Pressure: 0.05 mm Hg @ 20C
Viscosity: 36mPa @ 20C
Boiling Point: 197 deg C @ 760mmHg
Freezing/Melting Point: -40 deg C
Autoignition Temperature: 306 deg C ( 582.80 deg F)
Flash Point: 93 deg C ( 199.40 deg F)
Explosion Limits, lower: 1.30
Explosion Limits, upper: 9.0
Decomposition Temperature:
Solubility in water: Soluble in water.
Specific Gravity/Density: 0.922
Molecular Formula: C6H14O2
Molecular Weight: 118.18
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Hygroscopic: absorbs moisture or water from the air.
Conditions to Avoid:
Ignition sources, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong reducing agents, strong acids, acid chlorides, acid anhydrides, mineral acids.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 107-41-5: SA0810000 LD50/LC50:
CAS# 107-41-5: Draize test, rabbit, eye: 93 mg Severe; Draize test, rabbit, skin: 465 mg/24H Moderate; Draize test, rabbit, skin: 500 mg/24H Moderate; Inhalation, rat: LC50 = >310 mg/m3/1H; Oral, mouse: LD50 = 3097 mg/kg; Oral, rabbit: LD50 = 3200 mg/kg; Oral, rat: LD50 = 3700 mg/kg; Skin, rabbit: LD50 = 8560 uL/kg.
Carcinogenicity:
2-Methyl-2,4-pentanediol - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Fathead Minnow: LC50 = 10,700 mg/L; 96 Hr.; Flow-through, 24-26 degrees C, pH 7.5Fish: Goldfish: LC50 = 5000 mg/L; 24 Hr.; UnspecifiedBacteria: Phytobacterium phosphoreum: EC50 = 3038 mg/L; 30 Minutes; Microtox test
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 107-41-5: 1
Canada
CAS# 107-41-5 is listed on Canadas DSL List.
CAS# 107-41-5 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 107-41-5 is listed on the TSCA inventory.