英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
2-Methyl-2-butanethiol tech.
Synonym:
tert-Amyl mercapta
CAS:
1679-09-0
Section 1 - Chemical Product
MSDS Name:2-Methyl-2-butanethiol tech.
Synonym:tert-Amyl mercapta
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
1679-09-0 2-Methyl-2-butanethiol, tech. 216-843-4
Hazard Symbols: F
Risk Phrases: 11

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Highly flammable.Stench.
Potential Health Effects
The toxicological properties of this material have not been investigated. Use appropriate procedures to prevent opportunities for direct contact with the skin or eyes and to prevent inhalation.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower lids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Remove contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately. Do NOT induce vomiting. Allow the victim to rinse his mouth and then to drink 2-4 cupfuls of water, and seek medical advice.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Flammable Liquid.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
Autoignition Temperature: Not available.
Flash Point: -1 deg C ( 30.20 deg F) NFPA Rating: Not published.
Explosion Limits, Lower: Not available.
Upper: Not available.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material, (e.g., dry sand or earth), then place into a chemical waste container. Clean up spills immediately, observing precautions in the Protective Equipment section.

Section 7 - HANDLING and STORAGE
Handling:
Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Flammables-area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Personal Protective Equipment Eyes: Wear chemical goggles. Wear safety glasses and chemical goggles if splashing is possible.
Skin:
Wear appropriate protective gloves and clothing to prevent skin exposure. Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR ??1910.134 and ANSI Z88.2 requirements must be followed whenever workplace conditions warrant a respirators use. Wear a NIOSH/MSHA-approved (or equivalent) full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Not available.
Appearance: clear
Odor: None reported.
pH: Not available.
Vapor Pressure: 87.2 mmHg @ 37.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: 99.0 - 105.0 deg C @ 760.00mmHg
Freezing/Melting Point: 0 deg C
Decomposition Temperature: Not available.
Solubility: Not available.
Specific Gravity/Density: .8420g/cm3
Molecular Formula: C5H12S
Molecular Weight: 104.21

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Bases - oxidizing agents - reducing agents - alkali metals.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, irritating and toxic fumes and gases, carbon dioxide, hydrogen sulfide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 1679-09-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2-Methyl-2-butanethiol, tech. - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
For further information, contact Fisher Scientific.

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

CDG/CPL
IMO
Shipping Name: AMYL MERCAPTAN
Hazard Class: 3.2
UN Number: 1111
Packing Group: II
IATA
Shipping Name: AMYL MERCAPTAN
Hazard Class: 3
UN Number: 1111
Packing Group: II
RID/ADR
Shipping Name: AMYL MERCAPTANS
Dangerous Goods Code: 3(3B)
UN Number: 1111
Canadian TDG
No information available.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
WGK (Water Danger/Protection)
CAS# 1679-09-0:
Canada
CAS# 1679-09-0 is listed on Canadas DSL/NDSL List.
WHMIS: Not available.
CAS# 1679-09-0 is not listed on Canadas Ingredient Disclosure List.
Exposure Limits
US FEDERAL
TSCA
CAS# 1679-09-0 is listed on the TSCA inventory.