英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
3-Fluorophenyl isocyanate 97%
Synonym:
m-Fluorophenyl isocyanate; 1-Fluoro-3-isocyanatobenzene
CAS:
404-71-7
Section 1 - Chemical Product
MSDS Name:3-Fluorophenyl isocyanate 97%
Synonym:m-Fluorophenyl isocyanate; 1-Fluoro-3-isocyanatobenzene
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
404-71-7 3-Fluorophenyl isocyanate 97 206-966-1
Hazard Symbols: T
Risk Phrases: 10 23/24/25 36/37/38 42

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Flammable. Toxic by inhalation, in contact with skin and if swallowed. Irritating to eyes, respiratory system and skin. May cause sensitization by inhalation.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the flow of tears). May cause severe eye irritation and possible injury.
Skin:
May be harmful if absorbed through the skin. Organic isocyanates can cause local irritation and allergic reactions. Isocyanates, in general, can cause skin discoloration (staining) and hardening of the skin after repeated exposures.
Ingestion:
Harmful if swallowed. May cause gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation:
May be fatal if inhaled. Causes respiratory tract irritation. May cause allergic respiratory reaction. May cause irritation of the respiratory tract with burning pain in the nose and throat, coughing, wheezing, shortness of breath and pulmonary edema.
Chronic:
Chronic overexposure to isocyanates has been reported to cause lung damage, including decreased lung fuction, which may be permanent.

Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with soap and plenty of water. Remove contaminated clothing and shoes. Get medical aid if symptoms occur. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
POISON material. If inhaled, get medical aid immediately. Remove victim to fresh air. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Flammable liquid and vapor. Fire or excessive heat may result in violent rupture of the container due to bulk polymerization.
Approach fire from upwind to avoid hazardous vapors and toxic decomposition products. Vapors are heavier than air and may travel to a source of ignition and flash back. Vapors can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Use carbon dioxide or dry chemical.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Provide ventilation. Do not get water inside containers. Evacuate unnecessary personnel. Approach spill from upwind.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Do not allow contact with water. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep away from heat, sparks and flame. Do not breathe vapor or mist. Inform laundry personnel of contaminants hazards.
Use only with adequate ventilation or respiratory protection. Never work alone with this chemical.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible substances. Refrigerator/flammables. Store in tightly closed containers to prevent moisture contamination. Do not reseal if contamination is suspected.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 404-71-7: Personal Protective Equipment Eyes: Wear chemical splash goggles and face shield.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear, colorless
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: 41 deg C ( 105.80 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Hydrolysis.
Specific Gravity/Density: 1.2010g/cm3
Molecular Formula: C7H4FNO
Molecular Weight: 137.11

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. Moisture sensitive.
May polymerize.
Conditions to Avoid:
Ignition sources, moisture, excess heat, confined spaces.
Incompatibilities with Other Materials:
Water, alcohols, strong bases, strong oxidizing agents, amines, acids, organotin catalysts.
Hazardous Decomposition Products:
Hydrogen cyanide, nitrogen oxides, carbon monoxide, carbon dioxide, hydrogen fluoride gas.
Hazardous Polymerization: May occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 404-71-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
3-Fluorophenyl isocyanate - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: ISOCYANATES, TOXIC, FLAMMABLE, N.O.S.*
Hazard Class: 6.1 (3)
UN Number: 3080
Packing Group: II
IMO
Shipping Name: ISOCYANATES, TOXIC, FLAMMABLE, N.O.S.
Hazard Class: 6.1 (3)
UN Number: 3080
Packing Group: II
RID/ADR
Shipping Name: ISOCYANATES, TOXIC, FLAMMABLE, N.O.S.
Hazard Class: 6.1
UN Number: 3080
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 10 Flammable.
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 42 May cause sensitization by inhalation.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 38 In case of insufficient ventilation, wear
suitable respiratory equipment.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 404-71-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 404-71-7 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 404-71-7 is not listed on the TSCA inventory.
It is for research and development use only.