英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
3-Morpholinopropanal 1M solution in acetone
Synonym:
None
CAS:
67-64-1
Section 1 - Chemical Product
MSDS Name:3-Morpholinopropanal 1M solution in acetone
Synonym:None
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
67-64-1 Acetone 85.7 200-662-2
Hazard Symbols: F
Risk Phrases: 11

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Highly flammable.
Potential Health Effects
Eye:
Produces irritation, characterized by a burning sensation, redness, tearing, inflammation, and possible corneal injury.
Skin:
Exposure may cause irritation characterized by redness, dryness, and inflammation.
Ingestion:
May cause central nervous system depression, kidney damage, and liver damage. Symptoms may include: headache, excitement, fatigue, nausea, vomiting, stupor, and coma. May cause liver and kidney damage. May cause central nervous system depression, characterized by excitement, followed by headache, dizziness, drowsiness, and nausea. Advanced stages may cause collapse, unconsciousness, coma and possible death due to respiratory failure.
Inhalation:
Inhalation of high concentrations may cause central nervous system effects characterized by nausea, headache, dizziness, unconsciousness and coma. Causes respiratory tract irritation. May cause liver and kidney damage. May cause motor incoordination and speech abnormalities.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic inhalation may cause effects similar to those of acute inhalation.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
Containers can build up pressure if exposed to heat and/or fire. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors may form an explosive mixture with air.
Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Extremely flammable liquid and vapor. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. May be ignited by heat, sparks, and flame.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. For large fires, use water spray, fog, or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water. Cool containers with flooding quantities of water until well after fire is out.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Wear appropriate protective clothing to minimize contact with skin. Remove all sources of ignition. Provide ventilation. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces. Clean up residual material by washing area with a 2-5% solution of soda ash.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Flammables-area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 67-64-1: United Kingdom, WEL - TWA: 500 ppm TWA; 1210 mg/m3 TWA United Kingdom, WEL - STEL: 1500 ppm STEL; 3620 mg/m3 STEL United States OSHA: 1000 ppm TWA; 2400 mg/m3 TWA Belgium - TWA: 500 ppm VLE; 1210 mg/m3 VLE Belgium - STEL: 1000 ppm VLE; 2420 mg/m3 VLE France - VME: 750 ppm VME; 1800 mg/m3 VME Germany: 500 ppm TWA; 1200 mg/m3 TWA Japan: 200 ppm OEL; 470 mg/m3 OEL Malaysia: 500 ppm TWA; 1187 mg/m3 TWA Netherlands: 750 ppm MAC; 1780 mg/m3 MAC Russia: 200 mg/m3 TWA Spain: 500 ppm VLA-ED; 1210 mg/m3 VLA-ED CAS# 19851-01-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: colorless
Odor: sweetish odor - musky
pH: 7
Vapor Pressure: 180 mm Hg
Viscosity: Not available
Boiling Point: 133.2 deg F
Freezing/Melting Point: -139.6 deg F
Autoignition Temperature: 869 deg F ( 465.00 deg C)
Flash Point: -4 deg F ( -20.00 deg C)
Explosion Limits, lower: 2.5
Explosion Limits, upper: 12.8
Decomposition Temperature:
Solubility in water: Soluble.
Specific Gravity/Density: 0.79 (Water=1)
Molecular Formula: Solution
Molecular Weight: 0

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
High temperatures, incompatible materials, ignition sources, temperatures above 220C.
Incompatibilities with Other Materials:
Acids (mineral, non-oxidizing, e.g. hydrochloric acid, hydrofluoric acid, muriatic acid, phosphoric acid), acids (organic, e.g. acetic acid, benzoic acid, formic acid, methanoic acid, oxalic acid), alcohols and glycols (e.g. butyl alcohol, ethanol, methanol, ethylene glycol), aldehydes (e.g. acetaldehyde, acrolein, chloral hydrate, formaldehyde), amides (e.g. butyramide, diethyltoluamide, dimethyl formamide), amines (aliphatic and aromatic, e.g. dimethyl amine, propylamine, pyridine, triethylamine), azo, diazo, and hydrazines (e.g. dimethyl hydrazine, hydrazine, methyl hydrazine), carbamates (e.g. carbanolate, carbofuran), cyanides (e.g. potassium cyanide, sodium cyanide), dithiocarbamates (e.g. ferbam, maneb, metham, thiram), esters (e.g. butyl acetate, ethyl acetate, propyl formate), ethers (e.g. dioxane, furfuran, tetrahydrofuran (THF)), hydrocarbons (aromatic, e.g. benzene, chrysene, cumene, toluene), halogenated organics (e.g. dibromoethane, hexachlorobenzene, methyl chloride, trichloroethylene), isocyanates (e.g. methyl isocyanate), ketones (e.g. acetone, acetophenone, MEK, MIBK), mercaptans and other organic sulfides (e.g. butyl mercaptan, carbon disulfide, methanethiol), metals (alkali and alkaline, e.g. cesium, potassium, sodium), metals as powders (e.g. hafnium, raney nickel), metals as non-powders (e.g. brass, bronze, iron), nitrides (e.g. potassium nitride, sodium nitride), nitriles (e.g. acetonitrile, methyl cyanide), nitro compounds (organic, e.g. nitrobenzene, nitroglycerine, picric acid, trinitrotoluene), hydrocarbons (aliphatic, unsaturated, e.g. cyclopentene, ethylene, heptene), hydrocarbons (aliphatic, saturated, e.g. butane, heptane, isooctane), peroxides and hydroperoxides (organic, e.g. acetyl peroxide, benzoyl peroxide, butyl peroxide, methyl ethyl ketone peroxide), phenols and cresols (e.g. carbolic acid, creosote, cresol, phenol, resorcinol), organophosphates, phosphothioates (e.g. methylparathion, parathion, phorate, thionazin), sulfides (i.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 67-64-1: AL3150000 CAS# 19851-01-5 unlisted.
LD50/LC50:
CAS# 67-64-1: Dermal, guinea pig: LD50 = >9400 uL/kg; Draize test, rabbit, eye: 20 mg Severe; Draize test, rabbit, eye: 20 mg/24H Moderate; Draize test, rabbit, eye: 10 uL Mild; Draize test, rabbit, skin: 500 mg/24H Mild; Inhalation, mouse: LC50 = 44 gm/m3/4H; Inhalation, rat: LC50 = 50100 mg/m3/8H; Oral, mouse: LD50 = 3 gm/kg; Oral, rabbit: LD50 = 5340 mg/kg; Oral, rat: LD50 = 5800 mg/kg.
CAS# 19851-01-5.
Carcinogenicity:
Acetone - Not listed by ACGIH, IARC, or NTP.
3-Morpholinopropanal - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Rainbow trout LC50=5540 mg/L/96H Sunfish (tap water), death at 14250 ppm/24H Mosquito fish (turbid water) TLm=13000 ppm/48H Cas# 67-64-1: LC50 (96Hr.) rainbow trout = 5540 mg/L; Static conditions, 11-13 degrees C LC50 (96Hr) Fathead Minnow = 7280-8120 mg/L; Flow-through Conditions LC50 (96Hr) Bluegill = 8300 mg/L Other For more information, see "HANDBOOK OF ENVIRONMENTAL FATE AND EXPOSURE DATA."
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Flammable Liquid, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II
USA RQ: CAS# 67-64-1: 5000 lb final RQ; 2270 kg final RQ

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F
Risk Phrases:
R 11 Highly flammable.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 23 Do not inhale gas/fumes/vapour/spray.
S 33 Take precautionary measures against static
discharges.
WGK (Water Danger/Protection)
CAS# 67-64-1: 0
CAS# 19851-01-5: No information available.
Canada
CAS# 67-64-1 is listed on Canadas DSL List.
CAS# 67-64-1 is listed on Canadas Ingredient Disclosure List.
CAS# 19851-01-5 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 67-64-1 is listed on the TSCA inventory.
CAS# 19851-01-5 is not listed on the TSCA inventory.
It is for research and development use only.