英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
4 4 -Dimethyldiphenyl ditelluride 98%
Synonym:
None
CAS:
32294-57-8
Section 1 - Chemical Product
MSDS Name:4 4 -Dimethyldiphenyl ditelluride 98%
Synonym:None
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
32294-57-8 4,4-Dimethyldiphenyl ditelluride, 98% 98% unlisted
Hazard Symbols: None Listed.
Risk Phrases: None Listed.

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Wash hands before eating. Use with adequate ventilation. Avoid breathing dust, vapor, mist, or gas. Do not get on skin or in eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 32294-57-8: United Kingdom, WEL - TWA: (listed as tellurium): 0.1 mg/m3 TWA United Kingdom, WEL - STEL: (listed as tellurium): 0.3 mg/m3 STEL United States OSHA: 0.1 mg/m3 TWA (listed under Tellurium).
Belgium - TWA: (listed as tellurium): 0.1 mg/m3 VLE France - VME: (listed as tellurium): 0.1 mg/m3 VME Germany: (listed as tellurium): 0.1 mg/m3 VME Malaysia: (listed as tellurium): 0.1 mg/m3 TWA Netherlands: (listed as tellurium): 0.1 mg/m3 MAC Russia: (listed as tellurium): 0.01 mg/m3 TWA Spain: (listed as tellurium): 0.1 mg/m3 VLA-ED Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: dark red
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 54 - 57 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C14H14Te2
Molecular Weight: 437.46

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 32294-57-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4,4-Dimethyldiphenyl ditelluride, 98% - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: TELLURIUM COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3284
Packing Group: III
IMO
Shipping Name: TELLURIUM COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3284
Packing Group: III
RID/ADR
Shipping Name: TELLURIUM COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 3284
Packing group: III

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 32294-57-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 32294-57-8 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 32294-57-8 is not listed on the TSCA inventory.
It is for research and development use only.