Name:
4-Chlorobutyryl chloride specialty project grade
Section 1 - Chemical Product
MSDS Name:4-Chlorobutyryl chloride specialty project grade
Synonym:
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 4635-59-0 | 4-Chlorobutyryl chloride | | 225-059-1 |
Hazard Symbols: T Risk Phrases: 22 23 35 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful if swallowed. Toxic by inhalation. Causes severe burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes severe eye burns. Lachrymator (substance which increases the flow of tears).
Skin:
Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema. Causes chemical burns to the respiratory tract. Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema. Toxic if inhaled.
Chronic:
Not available.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do NOT induce vomiting and seek IMMEDIATE MEDICAL ADVICE.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Combustible liquid.
Extinguishing Media:
Do NOT use water directly on fire. Use foam, dry chemical, or carbon dioxide.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Provide ventilation.
Section 7 - HANDLING and STORAGE
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place. Do not store in direct sunlight. Store in a tightly closed container.
Corrosives area.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 4635-59-0: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Clear liquid
Color: light yellow - amber
Odor: stench
pH: Not available.
Vapor Pressure: 3 mm Hg @20 deg C
Viscosity: 1.84 mPas 20 deg C
Boiling Point: 173 - 174 deg C @ 7
Freezing/Melting Point: -47 deg C
Autoignition Temperature: 440 deg C ( 824.00 deg F)
Flash Point: 85 deg C ( 185.00 deg F)
Explosion Limits, lower: 5.50 vol %
Explosion Limits, upper: 11.70 vol %
Decomposition Temperature: >120 deg C
Solubility in water: Hydrolysis.
Specific Gravity/Density: 1.2580g/cm3
Molecular Formula: Cl(CH2)3COCl
Molecular Weight: 141.00
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, light, exposure to moist air or water.
Incompatibilities with Other Materials:
Water, oxidizing agents, strong bases, alcohols, amines.
Hazardous Decomposition Products:
Hydrogen chloride, phosgene, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 4635-59-0: EM1406000 LD50/LC50:
CAS# 4635-59-0: Inhalation, rat: LC50 = 650 mg/m3/4H.
Carcinogenicity:
4-Chlorobutyryl chloride - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Other No information available.
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
No information available.
IMO
No information available.
RID/ADR
No information available.
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 22 Harmful if swallowed.
R 23 Toxic by inhalation.
R 35 Causes severe burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 4635-59-0: No information available.
Canada
CAS# 4635-59-0 is listed on Canadas DSL List.
CAS# 4635-59-0 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 4635-59-0 is listed on the TSCA inventory.