英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
4-Methyl-2-pentanone
Synonym:
Isobutyl methyl ketone; Methyl isobutyl ketone; Hexone; Isopropylacetone; MIBK; 4-Methyl-2-pentanone
CAS:
108-10-1
Section 1 - Chemical Product
MSDS Name:4-Methyl-2-pentanone
Synonym:Isobutyl methyl ketone; Methyl isobutyl ketone; Hexone; Isopropylacetone; MIBK; 4-Methyl-2-pentanone
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
108-10-1 Methyl isobutyl ketone >98.5 203-550-1
Hazard Symbols: XN F
Risk Phrases: 11 36/37 20 66

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Highly flammable. Irritating to eyes and respiratory system. Harmful by inhalation. Repeated exposure may cause skin dryness or cracking.
Potential Health Effects
Eye:
Contact produces irritation, tearing, and burning pain. Vapors cause eye irritation.
Skin:
Prolonged and/or repeated contact may cause irritation and/or dermatitis. A single prolonged skin exposure is not likely to result in the material being absorbed in harmful amounts.
Ingestion:
May cause effects similar to those for inhalation exposure.
Aspiration of material into the lungs may cause chemical pneumonitis, which may be fatal.
Inhalation:
Inhalation of high concentrations may cause central nervous system effects characterized by nausea, headache, dizziness, unconsciousness and coma. Causes respiratory tract irritation. Exposure produces central nervous system depression. May cause liver abnormalities.
Chronic:
Prolonged or repeated skin contact may cause defatting and dermatitis. This material has caused kidney effects in male rats which are not considered relevant to humans.

Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
Ingestion:
Potential for aspiration if swallowed. Get medical aid immediately.
Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Vapors are heavier than air and may travel to a source of ignition and flash back. Vapors can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Water may be ineffective. In case of fire, use carbon dioxide, dry chemical powder or appropriate foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Remove all sources of ignition.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Use only with adequate ventilation. Keep away from heat, sparks and flame. Avoid breathing vapor or mist.
Storage:
Keep away from sources of ignition. Store in a cool, dry, well-ventilated area away from incompatible substances.
Flammables-area. Containers should be dated when opened and tested periodically for the presence of peroxides. Should crystals form in a peroxidizable liquid, peroxidation may have occurred and the product should be considered extremely dangerous. In this instance, the container should only be opened remotely by professionals. All peroxidizable substances should be stored away from heat and light and be protected from ignition sources.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 108-10-1: United Kingdom, WEL - TWA: 50 ppm TWA; 208 mg/m3 TWA United Kingdom, WEL - STEL: 100 ppm STEL; 416 mg/m3 STEL United States OSHA: 100 ppm TWA; 410 mg/m3 TWA Belgium - TWA: 20 ppm VLE; 83 mg/m3 VLE Belgium - STEL: 50 ppm VLE; 208 mg/m3 VLE France - VME: 50 ppm VME; 205 mg/m3 VME Germany: 20 ppm TWA; 83 mg/m3 TWA Germany: Skin absorber Japan: 50 ppm OEL; 200 mg/m3 OEL Malaysia: 50 ppm TWA; 205 mg/m3 TWA Netherlands: 50 ppm STEL; 208 mg/m3 STEL Netherlands: 25 ppm MAC; 104 mg/m3 MAC Russia: 5 mg/m3 TWA Spain: 20 ppm VLA-ED; 83 mg/m3 VLA-ED Spain: 50 ppm VLA-EC; 208 mg/m3 VLA-EC Personal Protective Equipment Eyes: Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear, colorless
Odor: Sweet, camphor-like.
pH: Not available.
Vapor Pressure: 19.9 mm Hg @ 25 deg C
Viscosity: 0.61 cps @ 20 deg C
Boiling Point: 117 deg C @ 760 mm Hg
Freezing/Melting Point: -84 deg C
Autoignition Temperature: 448 deg C ( 838.40 deg F)
Flash Point: 14 deg C ( 57.20 deg F)
Explosion Limits, lower: 1.2% @ 93C
Explosion Limits, upper: 8.0% @ 93C
Decomposition Temperature:
Solubility in water: Moderately Soluble.
Specific Gravity/Density: 0.80 g/cm3
Molecular Formula: C6H12O
Molecular Weight: 100.16

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Under normal storage conditions, peroxidizable compounds can form and accumulate peroxides which may explode when subjected to heat or shock. This material is most hazardous when peroxide levels are concentrated by distillation or evaporation.
Conditions to Avoid:
Ignition sources, excess heat, confined spaces.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong reducing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 108-10-1: SA9275000 LD50/LC50:
CAS# 108-10-1: Draize test, rabbit, eye: 40 mg Severe; Draize test, rabbit, eye: 100 uL/24H Moderate; Draize test, rabbit, skin: 500 mg/24H Mild; Inhalation, mouse: LC50 = 23300 mg/m3; Inhalation, mouse: LC50 = 23300 mg/m3; Inhalation, rat: LC50 = 100 gm/m3; Oral, mouse: LD50 = 1900 mg/kg; Oral, mouse: LD50 = 2850 mg/kg; Oral, rat: LD50 = 2080 mg/kg; Oral, rat: LD50 = 4600 mg/kg.
Carcinogenicity:
Methyl isobutyl ketone - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Fathead Minnow: LC50 = 505 mg/L; 96 Hr.; Flow through; 25 degrees C, pH 7.5Fish: Goldfish: LC50 = 460 mg/L; 24 Hr.; UnspecifiedWater flea Daphnia: EC50 = 4280.0 mg/L; 24 Hr.; UnspecifiedAlgae: EC50 = 400 mg/L; 96 Hr.; UnspecifiedBacteria: Phytobacterium phosphoreum: EC50 = 79.6 mg/L; 5 minutes; Microtox test
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: METHYL ISOBUTYL KETONE
Hazard Class: 3
UN Number: 1245
Packing Group: II
IMO
Shipping Name: METHYL ISOBUTYL KETONE
Hazard Class: 3.2
UN Number: 1245
Packing Group: II
RID/ADR
Shipping Name: METHYL ISOBUTYL KETONE
Hazard Class: 3
UN Number: 1245
Packing group: II
USA RQ: CAS# 108-10-1: 5000 lb final RQ; 2270 kg final RQ

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 11 Highly flammable.
R 20 Harmful by inhalation.
R 36/37 Irritating to eyes and respiratory system.
R 66 Repeated exposure may cause skin dryness or
cracking.
Safety Phrases:
S 9 Keep container in a well-ventilated place.
S 16 Keep away from sources of ignition - No
smoking.
S 29 Do not empty into drains.
WGK (Water Danger/Protection)
CAS# 108-10-1: 1
Canada
CAS# 108-10-1 is listed on Canadas DSL List.
CAS# 108-10-1 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 108-10-1 is listed on the TSCA inventory.