英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
Acrylamide/Bis-Acrylamide Mixture
Synonym:
CAS:
79-06-1
Section 1 - Chemical Product
MSDS Name:Acrylamide/Bis-Acrylamide Mixture
Synonym:
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
79-06-1 Acrylamide 90-99 201-173-7
Hazard Symbols: T
Risk Phrases: 20/21 25 36/38 43 45 46 48/23/24/25 62

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful by inhalation and in contact with skin. Toxic if swallowed.
Irritating to eyes and skin. May cause sensitization by skin contact. May cause cancer. May cause heritable genetic damage. Toxic : danger of serious damage to health by prolonged exposure through inhalation, contact with skin and if swallowed. Possible risk of impaired fertility.Cancer suspect agent.Light sensitive.Air sensitive.
Potential Health Effects
Eye:
Causes eye irritation. Acrylamide can be absorbed through the eyes and overexposure will produce the signs and symptoms of neurotoxicity described below.
Skin:
May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material. Acrylamide is readily absorbed through unbroken skin and can cause nervous system effects (neurotoxicity). These effects can result from a single overexposure but are more likely after repeated exposures to small amounts over a period of days or weeks. Signs and symptoms of overexposure include increased sweating of the hands and feet, numbness, tingling and weakness in the extremities, unsteady gait and decreased reflexes.
If the exposure route is dermal, the symptoms may be preceded by peeling and redness of the skin at the areas of exposure, normally the hands and feet.
Ingestion:
Harmful if swallowed.
Inhalation:
Acrylamide tends to sublime (go directly from solid to vapor form) which may lead to inhalation exposure. Acrylamide can be absorbed through the lungs and overexposure will produce the signs and symptoms of neurotoxicity described above.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. May cause cancer according to animal studies. Adverse reproductive effects have been reported in animals. Prolonged or repeated exposure affects the nervous system.

Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
Skin:
In case of contact, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Get medical aid immediately. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Either acute or chronic exposure may lead to weak or absent reflexes, positive Rombergs sign, loss of vibration and position senses and numbness and tingling of the limbs. An early sign of toxic effects is peeling of the skin of the fingertips.
Antidote: Pyridoxine (vitamin B6), pyruvate, and N-acetylcysteine have been used to reduce the toxicity of acrylamide in experimental studies, but are unproven.

Section 5 - FIRE FIGHTING MEASURES
General Information:
Containers can build up pressure if exposed to heat and/or fire. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Use water spray to keep fire-exposed containers cool. Dust can be an explosion hazard when exposed to heat or flame.
Combustible solid. Approach fire from upwind to avoid hazardous vapors and toxic decomposition products. Fight fire from maximum distance or use unmanned hose holders or monitor nozzles.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions.
Remove all sources of ignition. Isolate area and deny entry. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Minimize dust generation and accumulation. Do not get in eyes, on skin, or on clothing. Keep container tightly closed.
Keep away from heat, sparks and flame. Do not ingest or inhale. Use only in a chemical fume hood.
Storage:
Keep away from heat, sparks, and flame. Do not store in direct sunlight. Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances.
Keep away from acids. Do not store near alkaline substances. Keep away from polymerization catalysts. Should not be exposed to temperatures above 122F (50C).

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Utilize a closed system process where feasible.
Exposure Limits CAS# 79-06-1: United Kingdom, WEL - TWA: 0.3 mg/m3 TWA United Kingdom, WEL - STEL: 0.9 mg/m3 STEL United States OSHA: 0.3 mg/m3 TWA Belgium - TWA: 0.03 mg/m3 VLE France - VME: 0.1 ppm VME; 0.3 mg/m3 VME Germany: 0.06 mg/m3 TWA (solid); 0.03 mg/m3 TWA Germany: Skin absorber Japan: 0.1 mg/m3 OEL Malaysia: 0.03 mg/m3 TWA Russia: 0.2 mg/m3 TWA Spain: 0.03 mg/m3 VLA-ED CAS# 110-26-9: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: white
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water
Specific Gravity/Density: Not available.
Molecular Formula: Mixture
Molecular Weight: Not available

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable. However may polymerize explosively if heated to the melting point. May polymerize on exposure to light.
Conditions to Avoid:
Light, ignition sources, moisture, exposure to air, heat.
Incompatibilities with Other Materials:
Metals, oxidizing agents, reducing agents, acids, bases, peroxides.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, carbon dioxide, ammonia and/or derivatives, hydrogen gas.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 79-06-1: AS3325000 CAS# 110-26-9: AS3678000 LD50/LC50:
CAS# 79-06-1: Draize test, rabbit, eye: 100 mg/24H Moderate; Draize test, rabbit, skin: 50 mg/3D Mild; Draize test, rabbit, skin: 500 mg/24H Mild; Oral, mouse: LD50 = 107 mg/kg; Oral, rabbit: LD50 = 150 mg/kg; Oral, rat: LD50 = 124 mg/kg; Skin, rabbit: LD50 = 1680 uL/kg; Skin, rat: LD50 = 400 mg/kg.
CAS# 110-26-9: Oral, mouse: LD50 = 380 mg/kg; Oral, rat: LD50 = 390 mg/kg.
Carcinogenicity:
Acrylamide - ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to California: carcinogen, initial date 1/1/90 NTP: Suspect carcinogen IARC: Group 2A carcinogen Methylenediacrylamide - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION
Other No information available.

Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: ACRYLAMIDE
Hazard Class: 6.1
UN Number: 2074
Packing Group: III
IMO
Shipping Name: ACRYLAMIDE
Hazard Class: 6.1
UN Number: 2074
Packing Group: III
RID/ADR
Shipping Name: ACRYLAMIDE
Hazard Class: 6.1
UN Number: 2074
Packing group: III
USA RQ: CAS# 79-06-1: 5000 lb final RQ; 2270 kg final RQ

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 45 May cause cancer.
R 46 May cause heritable genetic damage.
R 20/21 Harmful by inhalation and in contact with
skin.
R 25 Toxic if swallowed.
R 36/38 Irritating to eyes and skin.
R 43 May cause sensitization by skin contact.
R 48/23/24/25 Toxic : danger of serious damage to
health by prolonged exposure through inhalation,
contact with skin and if swallowed.
R 62 Possible risk of impaired fertility.
Safety Phrases:
S 53 Avoid exposure - obtain special instructions
before use.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 79-06-1: 3
CAS# 110-26-9: 2
Canada
CAS# 79-06-1 is listed on Canadas DSL List.
CAS# 110-26-9 is listed on Canadas DSL List.
CAS# 79-06-1 is listed on Canadas Ingredient Disclosure List.
CAS# 110-26-9 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 79-06-1 is listed on the TSCA inventory.
CAS# 110-26-9 is listed on the TSCA inventory.