Name:
Ammonium Molybdate Solution
Synonym:
Ammonium heptamolybdate ((NH4)6Mo7O24) tetrahydrate; Ammonium paramolybdate tetrahydrate; Molybdic acid (H6Mo7O24), hexaammonium salt, tetrahydrate
Section 1 - Chemical Product
MSDS Name:Ammonium Molybdate Solution
Synonym:Ammonium heptamolybdate ((NH4)6Mo7O24) tetrahydrate; Ammonium paramolybdate tetrahydrate; Molybdic acid (H6Mo7O24), hexaammonium salt, tetrahydrate
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7732-18-5 | Water | 96 | 231-791-2 |
Hazard Symbols: XN Risk Phrases: 22 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful if swallowed.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Low hazard for usual industrial handling.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid if irritation develops or persists. Flush skin with plenty of soap and water.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to extinguish surrounding fire.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container.
Section 7 - HANDLING and STORAGE
Handling:
Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage:
Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 7732-18-5: CAS# 12027-67-7: United Kingdom, WEL - TWA: (listed as molybdenum soluble compound 5 mg/m3 TWA (as Mo) United Kingdom, WEL - STEL: (listed as molybdenum soluble compoun 10 mg/m3 STEL (as Mo) United States OSHA: 5 mg/m3 TWA (as Mo) (listed under Molybdenum soluble compounds).
Belgium - TWA: (listed as molybdenum soluble compounds): 5 mg/m3 (as Mo) France - VME: (listed as molybdenum soluble compounds): 5 mg/m3 V (as Mo) France - VLE: (listed as molybdenum soluble compounds): 10 mg/m3 (as Mo) Germany: (listed as molybdenum soluble compounds): 5 mg/m3 VME (a Mo) Malaysia: (listed as molybdenum soluble compounds): 5 mg/m3 TWA ( Mo) Netherlands: (listed as molybdenum soluble compounds): 5 mg/m3 MA (as Mo) Russia: (listed as molybdenum soluble compounds): 2 mg/m3 TWA (as Spain: (listed as molybdenum soluble compounds): 5 mg/m3 VLA-ED ( Mo) CAS# 12054-85-2: United Kingdom, WEL - TWA: (listed as molybdenum soluble compound 5 mg/m3 TWA (as Mo) United Kingdom, WEL - STEL: (listed as molybdenum soluble compoun 10 mg/m3 STEL (as Mo) United States OSHA: 5 mg/m3 TWA (as Mo) (listed under Molybdenum soluble compounds).
Belgium - TWA: (listed as molybdenum soluble compounds): 5 mg/m3 (as Mo) France - VME: (listed as molybdenum soluble compounds): 5 mg/m3 V (as Mo) France - VLE: (listed as molybdenum soluble compounds): 10 mg/m3 (as Mo) Germany: (listed as molybdenum soluble compounds): 5 mg/m3 VME (a Mo) Malaysia: (listed as molybdenum soluble compounds): 5 mg/m3 TWA ( Mo) Netherlands: (listed as molybdenum soluble compounds): 5 mg/m3 MA (as Mo) Russia: (listed as molybdenum soluble compounds): 2 mg/m3 TWA (as Spain: (listed as molybdenum soluble compounds): 5 mg/m3 VLA-ED ( Mo) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Miscible with water
Specific Gravity/Density: 1.03
Molecular Formula: Solution
Molecular Weight: 0
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable.
Conditions to Avoid:
Strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizers.
Hazardous Decomposition Products:
Nitrogen oxides (NOx) and ammonia (NH3).
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7732-18-5: ZC0110000 CAS# 12027-67-7: QA5076000 CAS# 12054-85-2 unlisted.
LD50/LC50:
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
CAS# 12027-67-7.
CAS# 12054-85-2.
Carcinogenicity:
Water - Not listed by ACGIH, IARC, or NTP.
Ammonium molybdate(VI) anhydrous - Not listed by ACGIH, IARC, or NTP.
Ammonium molybdate(VI) tetrahydrate - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 22 Do not breathe dust.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7732-18-5: No information available.
CAS# 12027-67-7: 1
CAS# 12054-85-2: 1
Canada
CAS# 7732-18-5 is listed on Canadas DSL List.
CAS# 12027-67-7 is listed on Canadas DSL List.
CAS# 7732-18-5 is not listed on Canadas Ingredient Disclosure List.
CAS# 12027-67-7 is listed on Canadas Ingredient Disclosure List.
CAS# 12054-85-2 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7732-18-5 is listed on the TSCA inventory.
CAS# 12027-67-7 is listed on the TSCA inventory.
CAS# 12054-85-2 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).