Synonym:
Stibium; antimony regulu
Section 1 - Chemical Product
MSDS Name:Antimony
Synonym:Stibium; antimony regulu
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7440-36-0 | ANTIMONY | >=99.5 | 231-146-5 |
Hazard Symbols: XN Risk Phrases: 20/22 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful by inhalation and if swallowed.
Potential Health Effects
Eye:
Causes eye irritation. May cause conjunctivitis.
Skin:
Causes skin irritation. Chronic exposure may cause dizziness, dry throat, sleepiness, anorexia, and nausea. Chronic inhalation may result in liver, kidney, and cardiac changes.
Ingestion:
May cause severe digestive tract irritation with abdominal pain, nausea, vomiting and diarrhea.
Inhalation:
Dust is irritating to the respiratory tract. Inhalation of fumes may cause metal fume fever, which is characterized by flu-like symptoms with metallic taste, fever, chills, cough, weakness, chest pain, muscle pain and increased white blood cell count.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic exposure may cause dizziness, dry throat, sleepiness, anorexia, and nausea. Chronic inhalation may result in liver, kidney, and cardiac changes.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Antidote: The use of Dimercaprol or BAL (British Anti-Lewisite) as a chelating agent should be determined by qualified medical personnel.
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Material will burn in a fire. Dust can be an explosion hazard when exposed to heat or flame. Bulk metal is combustible in air at high temperatures.
Extinguishing Media:
DO NOT USE WATER, CO2, OR FOAM DIRECTLY ON FIRE ITSELF. Use dry sand, graphite powder, dry sodium chloride-based extinguishers.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions.
Section 7 - HANDLING and STORAGE
Handling:
Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes. Keep away from heat, sparks and flame. Avoid ingestion and inhalation.
Storage:
Keep away from heat and flame. Do not store in direct sunlight.
Store in a cool, dry, well-ventilated area away from incompatible substances. Tarnishes in moist air.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 7440-36-0: United Kingdom, WEL - TWA: 0.5 mg/m3 TWA United Kingdom, WEL - STEL: 1.5 mg/m3 STEL United States OSHA: 0.5 mg/m3 TWA Belgium - TWA: 0.5 mg/m3 VLE France - VME: 0.5 mg/m3 VME Germany: 0.5 mg/m3 TWA (inhalable fraction) Japan: 0.1 mg/m3 OEL Malaysia: 0.5 mg/m3 TWA Netherlands: 0.5 mg/m3 MAC Russia: 0.5 mg/m3 TWA Russia: 0.2 mg/m3 STEL Spain: 0.5 mg/m3 VLA-ED Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: silver white
Odor: none reported
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not available.
Boiling Point: 1635 deg C
Freezing/Melting Point: 630 deg C
Autoignition Temperature: 626 deg F ( 330.00 deg C)
Flash Point: Not applicable.
Explosion Limits, lower: 0.42 oz/ft3
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 6.684
Molecular Formula: Sb
Molecular Weight: 121.71
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Incompatible materials, ignition sources, moisture.
Incompatibilities with Other Materials:
Incompatible with ammonium nitrate, bromine, bromine trifluoride, bromoazide, chloric acid, chlorine, chlorine monoxide, chlorine trifluoride, fluorine, iodine, nitric acid, potassium nitrate, potassium permanganate, potassium peroxide, sodium nitrate, and sodium peroxide.
Hazardous Decomposition Products:
Stibine fumes.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7440-36-0: CC4025000 LD50/LC50:
CAS# 7440-36-0: Oral, rat: LD50 = 7 gm/kg.
Carcinogenicity:
ANTIMONY - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: ANTIMONY, POWDER
Hazard Class: 6.1
UN Number: 2871
Packing Group: III
IMO
Shipping Name: ANTIMONY, POWDER
Hazard Class: 6.1
UN Number: 2871
Packing Group: III
RID/ADR
Shipping Name: ANTIMONY, POWDER
Hazard Class: 6.1
UN Number: 2871
Packing group: III
USA RQ: CAS# 7440-36-0: 5000 lb final RQ (no reporting of releases of this hazar
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 20/22 Harmful by inhalation and if swallowed.
Safety Phrases:
S 22 Do not breathe dust.
WGK (Water Danger/Protection)
CAS# 7440-36-0: No information available.
Canada
CAS# 7440-36-0 is listed on Canadas DSL List.
CAS# 7440-36-0 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-36-0 is listed on the TSCA inventory.