英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
Antimony pentafluoride 99.5+%
Synonym:
Antimony (V) fluoride; Pentafluoroantimon
CAS:
7783-70-2
Section 1 - Chemical Product
MSDS Name:Antimony pentafluoride 99.5+%
Synonym:Antimony (V) fluoride; Pentafluoroantimon
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
7783-70-2 Antimony pentafluoride 99.5+% 232-021-8
Hazard Symbols: C N
Risk Phrases: 14 20/22 34 51/53

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Reacts violently with water. Harmful by inhalation and if swallowed.
Causes burns. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.Water-reactive.Moisture sensitive.Corrosive.
Potential Health Effects
Eye:
Contact with liquid is corrosive to the eyes and causes severe burns.
Skin:
Contact with liquid is corrosive and causes severe burns and ulceration.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Harmful if inhaled. Causes chemical burns to the respiratory tract.
Inhalation may be fatal as a result of spasm, inflammation, edema of the larynx and bronchi, chemical pneumonitis and pulmonary edema.
Chronic:
Chronic inhalation and ingestion may cause chronic fluoride poisoning (fluorosis) characterized by weight loss, weakness, anemia, brittle bones, and stiff joints.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. If water-reactive products are embedded in the skin, no water should be applied. The embedded products should be covered with a light oil.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water Reactive. Material will react with water and may release a flammable and/or toxic gas. May ignite or explode on contact with steam or moist air. May re-ignite after fire is extinguished.
Extinguishing Media:
Use dry sand or earth to smother fire. Substance is noncombustible; use agent most appropriate to extinguish surrounding fire. DO NOT USE WATER! Do NOT get water inside containers. Contact professional fire-fighters immediately. Cool containers with flooding quantities of water until well after fire is out.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation. Do not expose spill to water.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Do not allow water to get into the container because of violent reaction. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation. Do not allow contact with water. Use only in a chemical fume hood. Keep from contact with moist air and steam.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep under a nitrogen blanket. Keep away from water.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use only under a chemical fume hood.
Exposure Limits CAS# 7783-70-2: United Kingdom, WEL - TWA: (listed as antimony compounds): 0.5 mg TWA (except stibine, as Sb) United Kingdom, WEL - STEL: (listed as antimony compounds): 1.5 m STEL (except stibine, as Sb) United States OSHA: 0.5 mg/m3 TWA (listed under Antimony).2.5 mg TWA (as F) (listed under Fluorides).2.5 mg/m3 TWA (as F) (liste under Fluorides).0.5 mg/m3 TWA (as Sb) (listed under Antimony compounds).
Belgium - TWA: (listed as antimony compounds): 0.5 mg/m3 VLE (as France - VME: (listed as antimony compounds): 0.5 mg/m3 VME (as S Germany: (listed as antimony compounds): 0.5 mg/m3 VME (as Sb) Japan: (listed as antimony compounds): 0.1 mg/m3 OEL (except stib as Sb) Malaysia: (listed as antimony compounds): 0.5 mg/m3 TWA (as Sb) Netherlands: (listed as fluorides): 3.5 mg/m3 STEL (as F) Netherlands: (listed as antimony compounds): 0.5 mg/m3 MAC (as Sb Russia: 0.3 mg/m3 TWA Russia: (listed as antimony): 0.2 mg/m3 STEL Spain: (listed as antimony compounds): 0.5 mg/m3 VLA-ED (except antimony hydride, as Sb) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: 753 mbar @ 142 deg
Viscosity: Not available.
Boiling Point: 149.4 deg C @ 760.00mm Hg
Freezing/Melting Point: 7 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: reacts with water
Specific Gravity/Density: 2.9930g/cm3
Molecular Formula: F5Sb
Molecular Weight: 216.74

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. Reacts vigorously with water to form toxic hydrogen fluoride (hydrofluoric acid). If confined and wet, explosions can result.
Conditions to Avoid:
Incompatible materials, excess heat, exposure to moist air or water.
Incompatibilities with Other Materials:
Water, Slowly corrodes glass, copper and lead. When moisture is present, causes severe corrosion of metals (except steel) and glass..
Hazardous Decomposition Products:
Hydrogen fluoride gas, antimony/antimony oxides.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7783-70-2: CC5800000 LD50/LC50:
CAS# 7783-70-2: Inhalation, mouse: LC50 = 270 mg/m3.
Carcinogenicity:
Antimony pentafluoride - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: ANTIMONY PENTAFLUORIDE
Hazard Class: 8 (6.1)
UN Number: 1732
Packing Group: II
IMO
Shipping Name: ANTIMONY PENTAFLUORIDE
Hazard Class: 8 (6.1)
UN Number: 1732
Packing Group: II
RID/ADR
Shipping Name: ANTIMONY PENTAFLUORIDE
Hazard Class: 8
UN Number: 1732
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C N
Risk Phrases:
R 14 Reacts violently with water.
R 20/22 Harmful by inhalation and if swallowed.
R 34 Causes burns.
R 51/53 Toxic to aquatic organisms, may cause
long-term adverse effects in the aquatic environment.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37 Wear suitable protective clothing and
gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
S 61 Avoid release to the environment. Refer to
special instructions/safety data sheets.
WGK (Water Danger/Protection)
CAS# 7783-70-2: No information available.
Canada
CAS# 7783-70-2 is listed on Canadas DSL List.
CAS# 7783-70-2 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7783-70-2 is listed on the TSCA inventory.