Name:
Antimony(V)-Pentachloride Anhydrous 99%
Synonym:
Antimonic Chloride
Section 1 - Chemical Product
MSDS Name:Antimony(V)-Pentachloride Anhydrous 99%
Synonym:Antimonic Chloride
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7647-18-9 | Antimony(V)-Pentachloride | 99 | 231-601-8 |
Hazard Symbols: C Risk Phrases: 34 37 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns. Irritating to respiratory system.Corrosive.Water-reactive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause perforation of the digestive tract.
Inhalation:
Harmful if inhaled. May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema.
Chronic:
May cause reproductive and fetal effects.
Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
Containers can build up pressure if exposed to heat and/or fire. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Media:
Do NOT use water directly on fire. Substance is noncombustible; use agent most appropriate to extinguish surrounding fire. Do NOT get water inside containers. Cool containers with flooding quantities of water until well after fire is out.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation. Do not get water inside containers. Use water spray to reduce vapors or divert vapor cloud drift.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Do not get in eyes, on skin, or on clothing.
Keep container tightly closed. Do not ingest or inhale. Do not allow contact with water. Discard contaminated shoes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Keep under a nitrogen blanket. Corrosives area. Water free area.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 7647-18-9: United Kingdom, WEL - TWA: (listed as antimony compounds): 0.5 mg TWA (except stibine, as Sb) United Kingdom, WEL - STEL: (listed as antimony compounds): 1.5 m STEL (except stibine, as Sb) United States OSHA: 0.5 mg/m3 TWA (listed under Antimony).0.5 mg TWA (as Sb) (listed under Antimony compounds).
Belgium - TWA: (listed as antimony compounds): 0.5 mg/m3 VLE (as France - VME: (listed as antimony compounds): 0.5 mg/m3 VME (as S Germany: (listed as antimony compounds): 0.5 mg/m3 VME (as Sb) Japan: (listed as antimony compounds): 0.1 mg/m3 OEL (except stib as Sb) Malaysia: (listed as antimony compounds): 0.5 mg/m3 TWA (as Sb) Netherlands: (listed as antimony compounds): 0.5 mg/m3 MAC (as Sb Russia: 0.3 mg/m3 TWA Russia: (listed as antimony): 0.2 mg/m3 STEL Spain: (listed as antimony compounds): 0.5 mg/m3 VLA-ED (except antimony hydride, as Sb) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: colorless to yellow
Odor: Offensive odor.
pH: Not available.
Vapor Pressure: 1 mm Hg @ 20 C
Viscosity: Not available.
Boiling Point: 140 deg C (decomposes)
Freezing/Melting Point: 2.8 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 77 C
Solubility in water: Reacts with water.
Specific Gravity/Density: 2.3
Molecular Formula: Cl5Sb
Molecular Weight: 298.975
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, contact with water, temperatures above 50C (122F), exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents and moist air or water.
Hazardous Decomposition Products:
Hydrogen chloride, irritating and toxic fumes and gases, antimony/antimony oxides, chlorine.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7647-18-9: CC5075000 LD50/LC50:
CAS# 7647-18-9: Inhalation, mouse: LC50 = 620 mg/m3; Inhalation, rat: LC50 = 720 mg/m3/2H; Oral, rat: LD50 = 1115 mg/kg.
Carcinogenicity:
Antimony(V)-Pentachloride - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: ANTIMONY PENTACHLORIDE, LIQUID
Hazard Class: 8
UN Number: 1730
Packing Group: II
IMO
Shipping Name: ANTIMONY PENTACHLORIDE, LIQUID
Hazard Class: 8
UN Number: 1730
Packing Group: II
RID/ADR
Shipping Name: ANTIMONY PENTACHLORIDE, LIQUID
Hazard Class: 8
UN Number: 1730
Packing group: II
USA RQ: CAS# 7647-18-9: 1000 lb final RQ; 454 kg final RQ
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
R 37 Irritating to respiratory system.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 7647-18-9: No information available.
Canada
CAS# 7647-18-9 is listed on Canadas DSL List.
CAS# 7647-18-9 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7647-18-9 is listed on the TSCA inventory.