英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
Benzene Sulfonyl Chloride
Synonym:
Benzene sulfonchloride; benzenesulfonic chloride
CAS:
98-09-9
Section 1 - Chemical Product
MSDS Name:Benzene Sulfonyl Chloride
Synonym:Benzene sulfonchloride; benzenesulfonic chloride
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
98-09-9 Benzenesulfonyl chloride 100 % 202-636-6
Hazard Symbols: XN C
Risk Phrases: 22 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful if swallowed. Causes burns.Corrosive.Water-Reactive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns. May cause perforation of the digestive tract. May be harmful if swallowed.
Inhalation:
Causes chemical burns to the respiratory tract. May cause pulmonary edema and severe respiratory disturbances.
Chronic:
No information found.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
Ingestion:
Do NOT induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Containers may explode in the heat of a fire. May react exothermically with water, causing liberation of heat and possible spattering of material. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Contact with metals may evolve flammable hydrogen gas. Combustible material; may burn but does not ignite readily.
Extinguishing Media:
Do NOT get water inside containers. For large fires, use water spray, fog or alcohol-resistant foam. Do NOT use straight streams of water. Most foams will react with the material and release corrosive/toxic gases. Cool containers with flooding quantities of water until well after fire is out. For small fires, use dry chemical, dry sand, alcohol-resistant foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Large spills may be neutralized with dilute alkaline solutions of soda ash, or lime. Absorb the liquid and scrub the area with detergent and water. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation. Do not get water inside containers. A vapor suppressing foam may be used to reduce vapors.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Wash hands before eating. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Do not get in eyes, on skin, or on clothing.
Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Avoid contact with heat, sparks and flame. Do not ingest or inhale. Use caution when opening. Can explode without warning when caps of old containers are unscrewed. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a cool, dry place. Do not store in direct sunlight. Store in a tightly closed container. Keep from contact with oxidizing materials. Corrosives area. Water free area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels below recommended exposure limits. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.
Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure. Wear an impervious apron.
Clothing:
Wear appropriate protective clothing to prevent skin exposure. Wear an impervious apron.
Respirators:
Follow the OSHA respirator regulations found in 29CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Appearance: clear slightly yellow
Odor: None reported.
pH: Not available.
Vapor Pressure: 6 mm Hg @ 20 C
Viscosity: Not available.
Boiling Point: 252 deg C
Freezing/Melting Point: 15 deg C
Autoignition Temperature: 450 deg C ( 842.00 deg F)
Flash Point: > 110 deg C (> 230.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: > 252 deg C
Solubility in water: Reacts with water.
Specific Gravity/Density: 1.38
Molecular Formula: C6H5SO2Cl
Molecular Weight: 176.5468

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
High temperatures, mechanical shock, incompatible materials, ignition sources, contact with water.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, dimethyl sulfoxide, methyl formamide, and water or moisture.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 98-09-9: DB8750000 LD50/LC50:
CAS# 98-09-9: Oral, mouse: LD50 = 828 mg/kg; Oral, rabbit: LD50 = 828 mg/kg; Oral, rat: LD50 = 1960 mg/kg.
Carcinogenicity:
Benzenesulfonyl chloride - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: BENZENESULPHONYL CHLORIDE
Hazard Class: 8
UN Number: 2225
Packing Group: III
IMO
Shipping Name: BENZENESULPHONYL CHLORIDE
Hazard Class: 8
UN Number: 2225
Packing Group: III
RID/ADR
Shipping Name: BENZENESULPHONYL CHLORIDE
Dangerous Goods Code: 8(36C)
UN Number: 2225

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN C
Risk Phrases:
R 22 Harmful if swallowed.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28 After contact with skin, wash immediately
with...
WGK (Water Danger/Protection)
CAS# 98-09-9: 1
United Kingdom Occupational Exposure Limits

Canada
CAS# 98-09-9 is listed on Canadas DSL List.
CAS# 98-09-9 is listed on Canadas Ingredient Disclosure List.
Exposure Limits
CAS# 98-09-9: OEL-RUSSIA:STEL 1 mg/m3;Skin
US FEDERAL
TSCA
CAS# 98-09-9 is listed on the TSCA inventory.