英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
Boron Trifluoride Diethyl Etherate Complex (Contains Approx. 45% BF3)
Synonym:
Boron trifluoride etherate
CAS:
109-63-7
Section 1 - Chemical Product
MSDS Name:Boron Trifluoride Diethyl Etherate Complex (Contains Approx. 45% BF3)
Synonym:Boron trifluoride etherate
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
109-63-7 Boron trifluoride diethyletherate 100 % 203-689-8
Hazard Symbols: T C
Risk Phrases: 10 23 34

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Flammable. Toxic by inhalation. Causes burns.Corrosive.Water-reactive.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns. May cause irreversible eye injury. When substance becomes wet or comes in contact with moisture of the mucous membranes, it will cause irritation. May cause chemical conjunctivitis and corneal damage.
Skin:
Causes skin burns. Contact with skin causes irritation and possible burns, especially if the skin is wet or moist. May cause irritation and dermatitis. May cause cyanosis of the extremities. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause perforation of the digestive tract. Causes severe pain, nausea, vomiting, diarrhea, and shock.
Ingestion of large amounts may cause CNS depression. May cause systemic effects.
Inhalation:
Causes chemical burns to the respiratory tract. May cause abdominal pain, nausea, vomiting, and inflammation of the gums and mouth.
Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. May cause systemic effects. May cause burning sensation in the chest.
Chronic:
Effects may be delayed.

Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
If water-reactive products are embedded in the skin, no water should be applied. The embedded products should be covered with a light oil.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Reacts violently with water giving off flammable gas which may explode. Vapors may form an explosive mixture with air. Vapors can travel to a source of ignition and flash back. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Will burn if involved in a fire. Water Reactive. Material will react with water and may release a flammable and/or toxic gas. Use water spray to keep fire-exposed containers cool. Containers may explode in the heat of a fire. Flammable liquid and vapor. May ignite or explode on contact with steam or moist air.
May re-ignite after fire is extinguished.
Extinguishing Media:
Use dry sand or earth to smother fire. Use carbon dioxide or dry chemical. DO NOT USE WATER! Do NOT get water inside containers.
Contact professional fire-fighters immediately. Cool containers with flooding quantities of water until well after fire is out.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Scoop up with a nonsparking tool, then place into a suitable container for disposal. Remove all sources of ignition. Use a spark-proof tool.
Provide ventilation. Do not expose spill to water. A vapor suppressing foam may be used to reduce vapors.

Section 7 - HANDLING and STORAGE
Handling:
Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Do not allow water to get into the container because of violent reaction. Ground and bond containers when transferring material. Use spark-proof tools and explosion proof equipment. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Take precautionary measures against static discharges. Keep away from heat, sparks and flame. Do not allow contact with water. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from heat and flame. Keep away from sources of ignition. Store in a cool, dry place. Keep container closed when not in use. Keep away from water.
Flammables-area.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 109-63-7: United States OSHA: 2.5 mg/m3 TWA (as F) (listed under Fluorides Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear straw colored
Odor: Not available.
pH: Not available.
Vapor Pressure: 60 mbar @ 20 C
Viscosity: Not available.
Boiling Point: 126 deg C
Freezing/Melting Point: -60 deg C
Autoignition Temperature: 185 deg C ( 365.00 deg F)
Flash Point: 50 deg F ( 10.00 deg C)
Explosion Limits, lower: 5.10
Explosion Limits, upper: 18.20
Decomposition Temperature: 110 deg C
Solubility in water: Reacts with water.
Specific Gravity/Density: 1.1280
Molecular Formula: C4H10BF3O
Molecular Weight: 141.8746

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. Combines vigorously or explosively with water.
Conditions to Avoid:
Mechanical shock, incompatible materials, ignition sources, excess heat, temperatures above 50C (122F), exposure to moist air or water.
Incompatibilities with Other Materials:
Water.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, boron trifluoride, diethyl ether, hydrogen fluoride gas, oxides of boron.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 109-63-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Boron trifluoride diethyletherate - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Boron trifluoride diethyl etherate
Hazard Class: 8
UN Number: 2604
Packing Group: I
IMO
Shipping Name: BORON TRIFLUORIDE DIETHYL ETHERATE
Hazard Class: 8
UN Number: 2604
Packing Group: I
RID/ADR
Shipping Name: BORON TRIFLUORIDE DIETHYL ETHERATE
Hazard Class: 8
UN Number: 2604
Packing group: I

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T C
Risk Phrases:
R 10 Flammable.
R 23 Toxic by inhalation.
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 109-63-7: No information available.
Canada
CAS# 109-63-7 is listed on Canadas DSL List.
CAS# 109-63-7 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 109-63-7 is listed on the TSCA inventory.