Name:
Copper(i) bromide 98%
Section 1 - Chemical Product
MSDS Name:Copper(i) bromide 98%
Synonym:Cuprous bromid
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7787-70-4 | Copper(I) bromide, 98% | 98% | 232-131-6 |
Hazard Symbols: XI Risk Phrases: 36/37/38 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.The toxicological properties of this material have not been fully investigated.Light sensitive.Air sensitive.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and diarrhea. No information found. The toxicological properties of this substance have not been fully investigated.
Inhalation:
Dust is irritating to the respiratory tract. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
Substance is noncombustible.
Extinguishing Media:
Substance is noncombustible; use agent most appropriate to extinguish surrounding fire.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Wash hands before eating. Use only in a well-ventilated area. Avoid breathing dust, vapor, mist, or gas.
Avoid contact with skin and eyes. Avoid ingestion and inhalation.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 7787-70-4: United Kingdom, WEL - TWA: (listed as copper): 0.2 mg/m3 TWA (fum 1 mg/m3 TWA (dust and mist) United Kingdom, WEL - STEL: (listed as copper): 0.6 mg/m3 STEL (fume); 2 mg/m3 STEL (dust and mist) United States OSHA: 0.1 mg/m3 TWA (fume); 1 mg/m3 TWA (dusts and mists) (listed under Copper).
Belgium - TWA: (listed as copper): 0.2 mg/m3 VLE (fume); 1 mg/m3 (dust and mist) France - VME: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 V (dust, as Cu) France - VLE: (listed as copper): 2 mg/m3 VLE (dust, as Cu) Germany: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 VME (d as Cu) Malaysia: (listed as copper): 0.2 mg/m3 TWA (fume, as Cu); 1 mg/m TWA (dust and mist, as Cu) Netherlands: (listed as copper): 0.2 mg/m3 MAC (smoke); 1 mg/m3 M (dust) Russia: (listed as copper): 1 mg/m3 TWA (dust) Russia: (listed as copper): 0.5 mg/m3 STEL (dust) Spain: (listed as copper): 0.2 mg/m3 VLA-ED (fume); 1 mg/m3 VLA-E (dust and mist, as Cu) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: light green
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 1345 deg C @ 760.00mm Hg
Freezing/Melting Point: 504 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: soluble in cold water
Specific Gravity/Density: 4.7100g/cm3
Molecular Formula: Br2Cu2
Molecular Weight: 286.89
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, exposure to air.
Incompatibilities with Other Materials:
Light, air, potassium, alkali metals, and strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen bromide.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7787-70-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Copper(I) bromide, 98% - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7787-70-4: 2
Canada
CAS# 7787-70-4 is listed on Canadas DSL List.
CAS# 7787-70-4 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7787-70-4 is listed on the TSCA inventory.