Section 1 - Chemical Product
MSDS Name:Copper(I) iodide
Synonym:
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7681-65-4 | Copper(I) iodide | | 231-674-6 |
Hazard Symbols: XI Risk Phrases: 36/37/38 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Light sensitive.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled.
Chronic:
Not available.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Get medical aid. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions.
Section 7 - HANDLING and STORAGE
Handling:
Avoid breathing dust, vapor, mist, or gas. Avoid contact with skin and eyes.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 7681-65-4: United Kingdom, WEL - TWA: (listed as copper): 0.2 mg/m3 TWA (fum 1 mg/m3 TWA (dust and mist) United Kingdom, WEL - STEL: (listed as copper): 0.6 mg/m3 STEL (fume); 2 mg/m3 STEL (dust and mist) United States OSHA: 0.1 mg/m3 TWA (fume); 1 mg/m3 TWA (dusts and mists) (listed under Copper).
Belgium - TWA: (listed as copper): 0.2 mg/m3 VLE (fume); 1 mg/m3 (dust and mist) France - VME: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 V (dust, as Cu) France - VLE: (listed as copper): 2 mg/m3 VLE (dust, as Cu) Germany: (listed as copper): 0.2 mg/m3 VME (fume); 1 mg/m3 VME (d as Cu) Malaysia: (listed as copper): 0.2 mg/m3 TWA (fume, as Cu); 1 mg/m TWA (dust and mist, as Cu) Netherlands: (listed as copper): 0.2 mg/m3 MAC (smoke); 1 mg/m3 M (dust) Russia: (listed as copper): 1 mg/m3 TWA (dust) Russia: (listed as copper): 0.5 mg/m3 STEL (dust) Spain: (listed as copper): 0.2 mg/m3 VLA-ED (fume); 1 mg/m3 VLA-E (dust and mist, as Cu) Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: Not available.
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 1290 deg C @760mmHg
Freezing/Melting Point: 602 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Insoluble.
Specific Gravity/Density:
Molecular Formula: CuI
Molecular Weight: 190.45
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light.
Incompatibilities with Other Materials:
Oxidizing agents, alkali metals, potassium.
Hazardous Decomposition Products:
Hydrogen iodide, iodine.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7681-65-4 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Copper(I) iodide - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
logPOW: 0.24
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 7681-65-4: 2
Canada
CAS# 7681-65-4 is listed on Canadas DSL List.
CAS# 7681-65-4 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7681-65-4 is listed on the TSCA inventory.