Name:
Dibutylboron trifluoromethanesulfonate in dichloromethane
Section 1 - Chemical Product
MSDS Name:Dibutylboron trifluoromethanesulfonate in dichloromethane
Synonym:
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 75-09-2 | Methylene chloride | | 200-838-9 |
Hazard Symbols: T Risk Phrases: 10 14 23/24/25 34 40 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Flammable. Reacts violently with water. Toxic by inhalation, in contact with skin and if swallowed. Causes burns. Limited evidence of a carcinogenic effect.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns. Toxic in contact with skin.
Ingestion:
Causes gastrointestinal tract burns. Toxic if swallowed.
Inhalation:
Causes chemical burns to the respiratory tract. Toxic if inhaled.
Chronic:
Limited evidence of a carcinogenic effect.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately. Wash mouth out with water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Vapors can travel to a source of ignition and flash back. Will burn if involved in a fire. Water Reactive. Material will react with water and may release a flammable and/or toxic gas.
Flammable liquid and vapor.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide. DO NOT USE WATER!
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Remove all sources of ignition.
Use a spark-proof tool. Do not expose spill to water.
Section 7 - HANDLING and STORAGE
Handling:
Use spark-proof tools and explosion proof equipment. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage:
Keep away from sources of ignition. Store in a cool, dry place.
Store in a tightly closed container. Flammables-area. Corrosives area. Water free area. Store under nitrogen.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local explosion-proof ventilation to keep airborne levels to acceptable levels.
Exposure Limits CAS# 75-09-2: United Kingdom, WEL - TWA: 100 ppm TWA; 350 mg/m3 TWA United Kingdom, WEL - STEL: 300 ppm STEL; 1060 mg/m3 STEL United States OSHA: ; 25 ppm TWA (8 hr); 125 ppm STEL (15 min); 1 ppm Action Level (See 29 CFR 1910 .1052) Belgium - TWA: 50 ppm VLE; 177 mg/m3 VLE France - VME: 50 ppm VME; 180 mg/m3 VME France - VLE: 100 ppm VLE; 350 mg/m3 VLE Germany: 100 ppm TWA; 350 mg/m3 TWA Japan: 50 ppm OEL; 170 mg/m3 OEL Japan: 100 ppm Ceiling; 340 mg/m3 Ceiling Malaysia: 50 ppm TWA Netherlands: 500 ppm STEL; 1750 mg/m3 STEL Netherlands: 100 ppm MAC; 350 mg/m3 MAC Russia: 50 mg/m3 TWA Spain: 50 ppm VLA-ED; 177 mg/m3 VLA-ED CAS# 60669-69-4: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 27 deg C ( 80.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Reacts.
Specific Gravity/Density: 1.271
Molecular Formula: C9H18BF3O3S
Molecular Weight: 274.11
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Air sensitive. Moisture sensitive.
Conditions to Avoid:
Incompatible materials, ignition sources, exposure to air, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, acids, alcohols.
Hazardous Decomposition Products:
Carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen fluoride gas, boron oxides.
Hazardous Polymerization: Not available.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 75-09-2: PA8050000 CAS# 60669-69-4 unlisted.
LD50/LC50:
CAS# 75-09-2: Draize test, rabbit, eye: 162 mg Moderate; Draize test, rabbit, eye: 10 mg Mild; Draize test, rabbit, eye: 500 mg/24H Mild; Draize test, rabbit, skin: 810 mg/24H Severe; Draize test, rabbit, skin: 100 mg/24H Moderate; Inhalation, mouse: LC50 = 14400 ppm/7H; Inhalation, mouse: LC50 = 49100 mg/m3/6H; Inhalation, mouse: LC50 = 54000 mg/m3/2H; Inhalation, mouse: LC50 = 56220 mg/m3/7H; Inhalation, rat: LC50 = 52 gm/m3; Inhalation, rat: LC50 = 76000 mg/m3/4H; Inhalation, rat: LC50 = 52000 mg/m3/6H; Oral, mouse: LD50 = 873 mg/kg; Oral, rabbit: LD50 = 2000 mg/kg; Oral, rat: LD50 = 1600 mg/kg; Oral, rat: LD50 = 985 mg/kg.
CAS# 60669-69-4.
Carcinogenicity:
Methylene chloride - ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to California: carcinogen, initial date 4/1/88 NTP: Suspect carcinogen IARC: Group 2B carcinogen Dibutylboron trifluoromethanesulfonate - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.*
(forbidden to ship via passenger or cargo air)
Hazard Class: 8 (3)
UN Number: 2920
Packing Group: II
IMO
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8 (3)
UN Number: 2920
Packing Group: II
RID/ADR
Shipping Name: CORROSIVE LIQUID, FLAMMABLE, N.O.S.
Hazard Class: 8 (3)
UN Number: 2920
Packing group: II
USA RQ: CAS# 75-09-2: 1000 lb final RQ; 454 kg final RQ
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T
Risk Phrases:
R 10 Flammable.
R 14 Reacts violently with water.
R 23/24/25 Toxic by inhalation, in contact with skin
and if swallowed.
R 34 Causes burns.
R 40 Limited evidence of a carcinogenic effect.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 23 Do not inhale gas/fumes/vapour/spray.
S 24/25 Avoid contact with skin and eyes.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 75-09-2: 2
CAS# 60669-69-4: No information available.
Canada
CAS# 75-09-2 is listed on Canadas DSL List.
CAS# 75-09-2 is listed on Canadas Ingredient Disclosure List.
CAS# 60669-69-4 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 75-09-2 is listed on the TSCA inventory.
CAS# 60669-69-4 is not listed on the TSCA inventory.
It is for research and development use only.