Name:
ETT Activator - Expedite
Section 1 - Chemical Product
MSDS Name:ETT Activator - Expedite
Synonym:None Known
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 75-05-8 | Acetonitrile | 96.0-97. | 200-835-2 |
Hazard Symbols: XN F Risk Phrases: 11 20/21/22 36 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Highly flammable. Harmful by inhalation, in contact with skin and if swallowed. Irritating to eyes.Lachrymator (substance which increases the flow of tears).Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
Causes eye irritation. Lachrymator (substance which increases the flow of tears). May produce superficial reversible injury.
Skin:
Causes mild skin irritation. Harmful if absorbed through the skin.
May be metabolized to cyanide which in turn acts by inhibiting cytochrome oxidase impairing cellular respiration.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. May cause effects similar to those for inhalation exposure. May cause tissue anoxia, characterized by weakness, headache, dizziness, confusion, cyanosis (bluish skin due to deficient oxygenation of the blood), weak and irregular heart beat, collapse, unconsciousness, convulsions, coma and death. May cause central nervous system depression. Metabolism may release cyanide, which may result in headache, dizziness, weakness, collapse, unconsciousness and possible death.
Inhalation:
Aspiration may lead to pulmonary edema. Vapors may cause dizziness or suffocation. Causes upper respiratory tract irritation. May be metabolized to cyanide which in turns act by inhibiting cytochrome oxidase impairing cellular respiration. May cause tissue anoxia, characterized by weakness, headache, dizziness, confusion, cyanosis (bluish discoloration of skin due to deficient oxygenation of the blood), weak and irregular heart beat, collapse, unconsciousness, convulsions, coma and death.
Chronic:
Prolonged or repeated skin contact may cause dermatitis. Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion. May cause liver and kidney damage. May be metabolized to cyanide which in turn acts by inhibiting cytochrome oxidase impairing cellular respiration. Animal studies have reported that fetal effects/abnormalities may occur when maternal toxicity is seen. Laboratory experiments have resulted in mutagenic effects.
Exposure to small amounts of cyanide compounds over long periods of time is reported to cause loss of appetite, headache, weakness, nausea, dizziness, and symptoms of irritation of the upper respiratory tract and eyes.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Exposure should be treated as a cyanide poisoning. Effects may be delayed. For methemoglobinemia, administer oxygen alone or with Methylene Blue depending on the methemoglobin concentration in the blood. May be partially metabolized to cyanide in the body.
Antidote: Always have a cyanide antidote kit on hand when working with cyanide compounds. Get medical advice to use. Methylene blue, alone or in combination with oxygen is indicated as a treatment in nitrite induced methemoglobinemia.
Section 5 - FIRE FIGHTING MEASURES
General Information:
Containers can build up pressure if exposed to heat and/or fire. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Water runoff can cause environmental damage. Dike and collect water used to fight fire. Vapors may form an explosive mixture with air. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Water may be ineffective.
Material is lighter than water and a fire may be spread by the use of water. Flammable liquid and vapor. Approach fire from upwind to avoid hazardous vapors and toxic decomposition products. Vapors are heavier than air and may travel to a source of ignition and flash back.
Vapors can spread along the ground and collect in low or confined areas.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Use water spray to cool fire-exposed containers. Water may be ineffective. Do NOT use straight streams of water. For large fires, use dry chemical, carbon dioxide, alcohol-resistant foam, or water spray. Cool containers with flooding quantities of water until well after fire is out.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Avoid runoff into storm sewers and ditches which lead to waterways.
Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Absorb spill using an absorbent, non-combustible material such as earth, sand, or vermiculite. Do not use combustible materials such as sawdust.
Provide ventilation. A vapor suppressing foam may be used to reduce vapors. Water spray may reduce vapor but may not prevent ignition in closed spaces. Approach spill from upwind.
Section 7 - HANDLING and STORAGE
Handling:
Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Ground and bond containers when transferring material. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not ingest or inhale. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances. Flammables-area. Store protected from moisture.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use explosion-proof ventilation equipment. Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 75-05-8: United Kingdom, WEL - TWA: 40 ppm TWA; 68 mg/m3 TWA United Kingdom, WEL - STEL: 60 ppm STEL; 102 mg/m3 STEL United States OSHA: 40 ppm TWA; 70 mg/m3 TWA Belgium - TWA: 40 ppm VLE; 68 mg/m3 VLE Belgium - STEL: 60 ppm VLE; 102 mg/m3 VLE France - VME: 40 ppm VME; 70 mg/m3 VME Germany: 20 ppm TWA; 34 mg/m3 TWA Germany: Skin absorber Malaysia: 40 ppm TWA; 67 mg/m3 TWA Netherlands: 40 ppm MAC; 70 mg/m3 MAC Russia: 10 mg/m3 TWA Spain: 40 ppm VLA-ED; 68 mg/m3 VLA-ED Spain: 60 ppm VLA-EC; 102 mg/m3 VLA-EC CAS# 89797-68-2: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: clear colorless
Odor: ethereal odor - sweetish odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 6-7 deg C
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: Solution
Molecular Weight: 0
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, ignition sources, excess heat, exposure to moist air or water, oxidizers.
Incompatibilities with Other Materials:
Oxidizing agents, reducing agents, acids, bases, alkali metals, fluorine, nitric acid, perchlorates, sulfuric acid, chlorosulfonic acid, oleum, dinitrogen tetraoxide, sulfites, indium, moisture, Attacks some forms of plastics, rubbers, and coatings., nitrating agents, N-fluoro compounds (e.g. perfluorourea + acetonitrile), lanthanide perchlorates, iron (III) perchlorate, 2-Cyano-2-propyl nitrate, trichlorosilane, diphenyl sulfoxide.
Hazardous Decomposition Products:
Hydrogen cyanide, nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 75-05-8: AL7700000 CAS# 89797-68-2 unlisted.
LD50/LC50:
CAS# 75-05-8: Draize test, rabbit, eye: 100 uL/24H Moderate; Inhalation, mouse: LC50 = 2693 ppm/1H; Inhalation, rabbit: LC50 = 2828 ppm/4H; Inhalation, rat: LC50 = 7551 ppm/8H; Oral, mouse: LD50 = 269 mg/kg; Oral, rabbit: LD50 = 50 mg/kg; Oral, rat: LD50 = 2460 mg/kg; Skin, rabbit: LD50 = >2 gm/kg.
CAS# 89797-68-2.
Carcinogenicity:
Acetonitrile - Not listed by ACGIH, IARC, or NTP.
5-(Ethylthio)-1H-Tetrazole - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: Fathead Minnow: 1150 ppm; 24 Hr; TLm (hard water)Fish: Fathead Minnow: 1000 mg/L; 96 Hr; TLm (soft water)Fish: Bluegill/Sunfish: 1850 mg/L; 96 Hr; TLm (soft water)Fish: Fathead Minnow: 1640 mg/L; 96 Hr; LC50 (flow-bioassay)Fish: Fathead Minnow: 1640 mg/L; 96 Hr; EC50 (flow-bioassay) Other Biodegradable.
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: II
IMO
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing Group: II
RID/ADR
Shipping Name: FLAMMABLE LIQUID, N.O.S.
Hazard Class: 3
UN Number: 1993
Packing group: II
USA RQ: CAS# 75-05-8: 5000 lb final RQ; 2270 kg final RQ
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN F
Risk Phrases:
R 11 Highly flammable.
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 36 Irritating to eyes.
Safety Phrases:
S 16 Keep away from sources of ignition - No
smoking.
S 27 Take off immediately all contaminated clothing.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 75-05-8: 2
CAS# 89797-68-2: No information available.
Canada
CAS# 75-05-8 is listed on Canadas DSL List.
CAS# 75-05-8 is listed on Canadas Ingredient Disclosure List.
CAS# 89797-68-2 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 75-05-8 is listed on the TSCA inventory.
CAS# 89797-68-2 is not listed on the TSCA inventory.
It is for research and development use only.