Name:
ICP Standard Metal Solution in 2% Nitric Acid
Synonym:
None
CAS:
7697-37-2
Section 1 - Chemical Product
MSDS Name:ICP Standard Metal Solution in 2% Nitric Acid
Synonym:None
Synonym:None
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7697-37-2 | Nitric acid | 2.0 | 231-714-2 |
| Hazard Symbols: None Listed. Risk Phrases: None Listed. |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.
Not available.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Antidote: None reported.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Antidote: None reported.
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section. Provide ventilation.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Wash thoroughly after handling. Use only in a well-ventilated area.
Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 7697-37-2: United Kingdom, WEL - TWA: 2 ppm TWA; 5.2 mg/m3 TWA United Kingdom, WEL - STEL: 4 ppm STEL; 10 mg/m3 STEL United States OSHA: 2 ppm TWA; 5 mg/m3 TWA Belgium - TWA: 2 ppm VLE; 5.3 mg/m3 VLE Belgium - STEL: 4 ppm VLE; 10 mg/m3 VLE France - VME: 2 ppm VME; 5 mg/m3 VME France - VLE: 4 ppm VLE; 10 mg/m3 VLE Germany: 2 ppm TWA; 5.2 mg/m3 TWA Japan: 2 ppm OEL; 5.2 mg/m3 OEL Malaysia: 2 ppm TWA; 5.2 mg/m3 TWA Netherlands: 0.5 ppm STEL; 1.3 mg/m3 STEL Russia: 2 mg/m3 TWA Spain: 2 ppm VLA-ED; 5.2 mg/m3 VLA-ED Spain: 4 ppm VLA-EC; 10 mg/m3 VLA-EC Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 7697-37-2: United Kingdom, WEL - TWA: 2 ppm TWA; 5.2 mg/m3 TWA United Kingdom, WEL - STEL: 4 ppm STEL; 10 mg/m3 STEL United States OSHA: 2 ppm TWA; 5 mg/m3 TWA Belgium - TWA: 2 ppm VLE; 5.3 mg/m3 VLE Belgium - STEL: 4 ppm VLE; 10 mg/m3 VLE France - VME: 2 ppm VME; 5 mg/m3 VME France - VLE: 4 ppm VLE; 10 mg/m3 VLE Germany: 2 ppm TWA; 5.2 mg/m3 TWA Japan: 2 ppm OEL; 5.2 mg/m3 OEL Malaysia: 2 ppm TWA; 5.2 mg/m3 TWA Netherlands: 0.5 ppm STEL; 1.3 mg/m3 STEL Russia: 2 mg/m3 TWA Spain: 2 ppm VLA-ED; 5.2 mg/m3 VLA-ED Spain: 4 ppm VLA-EC; 10 mg/m3 VLA-EC Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use. Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: HNO3 mixture
Molecular Weight:
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Decomposes when in contact with air, light, or organic matter.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Acids (organic, e.g. acetic acid, benzoic acid, formic acid, methanoic acid, oxalic acid), alcohols and glycols (e.g. butyl alcohol, ethanol, methanol, ethylene glycol), aldehydes (e.g.
acetaldehyde, acrolein, chloral hydrate, formaldehyde), amides (e.g.
butyramide, diethyltoluamide, dimethyl formamide), amines (aliphatic and aromatic, e.g. dimethyl amine, propylamine, pyridine, triethylamine), azo, diazo, and hydrazines (e.g. dimethyl hydrazine, hydrazine, methyl hydrazine), carbamates (e.g. carbanolate, carbofuran), caustics (e.g. ammonia, ammonium hydroxide, calcium hydroxide, potassium hydroxide, sodium hydroxide), cyanides (e.g.
potassium cyanide, sodium cyanide), dithiocarbamates (e.g. ferbam, maneb, metham, thiram), esters (e.g. butyl acetate, ethyl acetate, propyl formate), ethers (e.g. dioxane, furfuran, tetrahydrofuran (THF)), fluorides (inorganic, e.g. ammonium fluoride, calcium fluoride, cesium fluoride), hydrocarbons (aromatic, e.g. benzene, chrysene, cumene, toluene), halo.
Hazardous Decomposition Products:
Oxides of nitrogen, irritating and toxic fumes and gases.
Hazardous Polymerization: Will not occur.
Decomposes when in contact with air, light, or organic matter.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Acids (organic, e.g. acetic acid, benzoic acid, formic acid, methanoic acid, oxalic acid), alcohols and glycols (e.g. butyl alcohol, ethanol, methanol, ethylene glycol), aldehydes (e.g.
acetaldehyde, acrolein, chloral hydrate, formaldehyde), amides (e.g.
butyramide, diethyltoluamide, dimethyl formamide), amines (aliphatic and aromatic, e.g. dimethyl amine, propylamine, pyridine, triethylamine), azo, diazo, and hydrazines (e.g. dimethyl hydrazine, hydrazine, methyl hydrazine), carbamates (e.g. carbanolate, carbofuran), caustics (e.g. ammonia, ammonium hydroxide, calcium hydroxide, potassium hydroxide, sodium hydroxide), cyanides (e.g.
potassium cyanide, sodium cyanide), dithiocarbamates (e.g. ferbam, maneb, metham, thiram), esters (e.g. butyl acetate, ethyl acetate, propyl formate), ethers (e.g. dioxane, furfuran, tetrahydrofuran (THF)), fluorides (inorganic, e.g. ammonium fluoride, calcium fluoride, cesium fluoride), hydrocarbons (aromatic, e.g. benzene, chrysene, cumene, toluene), halo.
Hazardous Decomposition Products:
Oxides of nitrogen, irritating and toxic fumes and gases.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7697-37-2: QU5775000 QU5900000 LD50/LC50:
CAS# 7697-37-2: Inhalation, rat: LC50 = 260 mg/m3/30M; Inhalation, rat: LC50 = 130 mg/m3/4H; Inhalation, rat: LC50 = 67 ppm(NO2)/4H.
Carcinogenicity:
Nitric acid - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
CAS# 7697-37-2: QU5775000 QU5900000 LD50/LC50:
CAS# 7697-37-2: Inhalation, rat: LC50 = 260 mg/m3/30M; Inhalation, rat: LC50 = 130 mg/m3/4H; Inhalation, rat: LC50 = 67 ppm(NO2)/4H.
Carcinogenicity:
Nitric acid - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Other No information available.
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
IATA
No information available.
IMO
No information available.
RID/ADR
No information available.
USA RQ: CAS# 7697-37-2: 1000 lb final RQ; 454 kg final RQ
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
WGK (Water Danger/Protection)
CAS# 7697-37-2: 1
Canada
CAS# 7697-37-2 is listed on Canadas DSL List.
CAS# 7697-37-2 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7697-37-2 is listed on the TSCA inventory.
