英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
Mercurochrome 24-27% Mercury (corrected for volatiles)
Synonym:
Merbromin; 2,7-Dibromo-4-hydroxymercurifluoresceine disodium salt; Disodium 2,7-dibromo-4-(hydroxymercury)fluorescein; Disodium 2,7-dibrom-4-hydroxy-mercuri-fluorescein; DOMF; Fluorescein, 2,7-dibromo-4-(hydroxymercurio)-, disodium salt;
CAS:
129-16-8
Section 1 - Chemical Product
MSDS Name:Mercurochrome 24-27% Mercury (corrected for volatiles)
Synonym:Merbromin; 2,7-Dibromo-4-hydroxymercurifluoresceine disodium salt; Disodium 2,7-dibromo-4-(hydroxymercury)fluorescein; Disodium 2,7-dibrom-4-hydroxy-mercuri-fluorescein; DOMF; Fluorescein, 2,7-dibromo-4-(hydroxymercurio)-, disodium salt;
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
129-16-8 Mercurochrome 100 204-933-6
Hazard Symbols: T+
Risk Phrases: 26/27/28 33

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Very toxic by inhalation, in contact with skin and if swallowed.
Danger of cumulative effects.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. May cause conjunctivitis.
Skin:
May be fatal if absorbed through the skin. May cause irritation and dermatitis.
Ingestion:
May be fatal if swallowed. May cause central nervous system depression. May cause excessive salivation and loosening of the teeth. May cause nausea, vomiting, and diarrhea, possibly with blood.
Inhalation:
May be fatal if inhaled. May produce general weakness, vomiting, diarrhea, chest pains, coughing, shortness of breath, and cardiac insufficiency. Causes irritation of the mucous membrane and upper respiratory tract.
Chronic:
There is a danger of cumulative effects. Chronic exposure to mercury compounds may produce immunologic glomerular disease.

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Discard contaminated clothing in a manner which limits further exposure.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do not use mouth-to-mouth resuscitation if victim ingested or inhaled the substance; induce artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Do not flush into a sewer. Avoid generating dusty conditions. Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Do not ingest or inhale. Use only in a chemical fume hood. Discard contaminated shoes.
Storage:
Store in a tightly closed container. Poison room locked. Store in a cool, dry area away from incompatible substances.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 129-16-8: United States OSHA: 0.1 mg/m3 Ceiling (listed under Mercury, ary and inorganic compounds).
Belgium - TWA: (listed as mercury, aryl and inorganic compounds): mg/m3 VLE (as Hg) France - VME: (listed as mercury, aryl and inorganic compounds): mg/m3 VME (as Hg) Germany: (listed as mercury, aryl and inorganic compounds): 0.1 m VME (as Hg) Malaysia: (listed as mercury, aryl and inorganic compounds): 0.1 mg/m3 TWA (as Hg) Spain: (listed as mercury, aryl and inorganic compounds): 0.1 mg/ VLA-ED (as Hg) Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Crystals
Color: green
Odor: none reported
pH: 8.8 (0.5% aq. soln)
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: > 300 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble.
Specific Gravity/Density: Not available.
Molecular Formula: C20H8Br2HgO6Na2
Molecular Weight: 750.43

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation.
Incompatibilities with Other Materials:
Acids, alkaloid salts, strong oxidizing agents, strong acids.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, hydrogen bromide, mercury/mercury oxides.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 129-16-8: LM5250000 LD50/LC50:
Not available.
Carcinogenicity:
Mercurochrome - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: PHENYLMERCURIC COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 2026
Packing Group: II
IMO
Shipping Name: PHENYLMERCURIC COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 2026
Packing Group: II
RID/ADR
Shipping Name: PHENYLMERCURIC COMPOUND, N.O.S.
Hazard Class: 6.1
UN Number: 2026
Packing group: II

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 26/27/28 Very toxic by inhalation, in contact with
skin and if swallowed.
R 33 Danger of cumulative effects.
Safety Phrases:
S 13 Keep away from food, drink and animal feeding
stuffs.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36 Wear suitable protective clothing.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 129-16-8: No information available.
Canada
CAS# 129-16-8 is listed on Canadas DSL List.
CAS# 129-16-8 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 129-16-8 is not listed on the TSCA inventory.
It is for research and development use only.