英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
o-Anisaldehyde 98%
Synonym:
2-Methoxybenzaldehyde; 2-Anisaldehyde; o-Methoxybenzaldehyde; 6-Methoxybenzaldehyde; 2-Methoxybenzenecarboxaldehyde; Salicylaldehyde methyl ether
CAS:
135-02-4
Section 1 - Chemical Product
MSDS Name:o-Anisaldehyde 98%
Synonym:2-Methoxybenzaldehyde; 2-Anisaldehyde; o-Methoxybenzaldehyde; 6-Methoxybenzaldehyde; 2-Methoxybenzenecarboxaldehyde; Salicylaldehyde methyl ether
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
135-02-4 o-Anisaldehyde 98 205-171-7
Hazard Symbols: XI
Risk Phrases: 36/37/38

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.Air sensitive.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Prolonged or repeated contact may dry/defat the skin and cause irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Laboratory experiments have resulted in mutagenic effects.

Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid breathing dust.
Storage:
Do not store in direct sunlight. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Storage under a nitrogen blanket has been recommended.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 135-02-4: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: light yellow to light brown
Odor: phenol-like
pH: Not available.
Vapor Pressure: 1.21E-001 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 238 deg C @ 760 mm Hg
Freezing/Melting Point: 35-38 deg C
Autoignition Temperature: Not available.
Flash Point: 117 deg C ( 242.60 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: No data
Solubility in water: Insoluble.
Specific Gravity/Density: Not available.
Molecular Formula: C8H8O2
Molecular Weight: 136.15

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, prolonged exposure to air.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong reducing agents, strong bases.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 135-02-4: BZ2610000 LD50/LC50:
CAS# 135-02-4: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral, mouse: LD50 = 2400 mg/kg; Oral, rat: LD50 = 2500 mg/kg; Skin, rabbit: LD50 = >5 gm/kg.
Not available.
Carcinogenicity:
o-Anisaldehyde - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 22 Do not breathe dust.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 135-02-4: No information available.
Canada
CAS# 135-02-4 is listed on Canadas DSL List.
CAS# 135-02-4 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 135-02-4 is listed on the TSCA inventory.