Name:
Octadecylamine tech. 90%
Synonym:
Stearylamine; 1-Aminooctadecane; Octadecylamine
Section 1 - Chemical Product
MSDS Name:Octadecylamine tech. 90%
Synonym:Stearylamine; 1-Aminooctadecane; Octadecylamine
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 124-30-1 | Octadecylamine | 90 | 204-695-3 |
Hazard Symbols: XI Risk Phrases: 38 41 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to skin. Risk of serious damage to eyes.
Potential Health Effects
Eye:
Causes severe eye irritation.
Skin:
Causes skin irritation. Amines have been known to cause skin irritation and sensitization.
Ingestion:
May cause severe irritation of the digestive tract.
Inhalation:
May cause severe respiratory tract irritation. Material has a low vapor pressure, so exposure to vapor is not likely.
Chronic:
Not available.
Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid immediately.
Skin:
In case of contact, immediately flush skin with plenty of water.
Remove contaminated clothing and shoes. Get medical aid. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. This material in sufficient quantity and reduced particle size is capable of creating a dust explosion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up, then place into a suitable container for disposal. Avoid generating dusty conditions. Provide ventilation.
Section 7 - HANDLING and STORAGE
Handling:
Remove contaminated clothing and wash before reuse. Do not get in eyes, on skin, or on clothing. Keep container tightly closed. Use with adequate ventilation. Avoid breathing vapor.
Storage:
Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Corrosives area.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 124-30-1: CAS# 7732-18-5: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Pellets
Color: white
Odor: fish-like
pH: Not available.
Vapor Pressure: Negligible
Viscosity: Not available.
Boiling Point: 232 deg C @ 32mmHg
Freezing/Melting Point: 50-60 deg C
Autoignition Temperature: Not available.
Flash Point: 148 deg C ( 298.40 deg F)
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: >300 deg C
Solubility in water: practically insoluble
Specific Gravity/Density: 0.86
Molecular Formula: C18H39N
Molecular Weight: 269.51
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Dust generation, excess heat.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong acids, aluminum.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 124-30-1: RG4150000 CAS# 7732-18-5: ZC0110000 LD50/LC50:
CAS# 124-30-1: Draize test, rabbit, skin: 20 mg/24H Moderate; Oral, mouse: LD50 = 3 gm/kg; Oral, rat: LD50 = 2395 mg/kg.
CAS# 7732-18-5: Oral, rat: LD50 = >90 mL/kg.
Carcinogenicity:
Octadecylamine - Not listed by ACGIH, IARC, or NTP.
Water - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 38 Irritating to skin.
R 41 Risk of serious damage to eyes.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28B After contact with skin, wash immediately with
plenty of water and soap.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 124-30-1: 2
CAS# 7732-18-5: No information available.
Canada
CAS# 124-30-1 is listed on Canadas DSL List.
CAS# 7732-18-5 is listed on Canadas DSL List.
CAS# 124-30-1 is listed on Canadas Ingredient Disclosure List.
CAS# 7732-18-5 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 124-30-1 is listed on the TSCA inventory.
CAS# 7732-18-5 is listed on the TSCA inventory.