Section 1 - Chemical Product
MSDS Name:OptiPhase Hisafe 2
Synonym:Mixtur
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 0-00-4 | OptiPhase Hisafe 2 | 0-1 | 202-181-3 |
Hazard Symbols: XI Risk Phrases: 36/38 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes and skin.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
Causes eye irritation. May result in corneal injury.
Skin:
May cause skin irritation. Prolonged and/or repeated contact may cause defatting of the skin and dermatitis.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
Prolonged or repeated skin contact may cause defatting and dermatitis.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid if irritation develops or persists. Flush skin with plenty of soap and water.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Sweep up, then place into a suitable container for disposal.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Avoid prolonged or repeated contact with skin. Avoid ingestion and inhalation. Use with adequate ventilation.
Storage:
Store in a tightly closed container.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 0-00-4: CAS# 0-00-6: CAS# 0-01-1: CAS# 0-03-3: CAS# 92-71-7: CAS# 111-42-2: Belgium - TWA: 0.46 ppm VLE; 2 mg/m3 VLE France - VME: 3 ppm VME; 15 mg/m3 VME Germany: 15 mg/m3 TWA (inhalable fraction) Germany: Skin absorber Malaysia: 0.46 ppm TWA; 2 mg/m3 TWA Netherlands: 0.46 ppm MAC; 2 mg/m3 MAC Russia: 5 mg/m3 TWA Spain: 0.46 ppm VLA-ED; 2 mg/m3 VLA-ED CAS# 112-34-5: Germany: 100 mg/m3 TWA Netherlands: 9 ppm MAC; 50 mg/m3 MAC Spain: 100 mg/m3 VLA-ED CAS# 16940-66-2: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: colorless
Odor: Perceptible odor
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: > 140 deg C (> 284.00 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: Forms an emulsion with water
Specific Gravity/Density: 0.982
Molecular Formula: Mixture
Molecular Weight: 0
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizers.
Hazardous Decomposition Products:
Nitrogen oxides, sulfur oxides (SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 0-00-4 unlisted.
CAS# 0-00-6 unlisted.
CAS# 0-01-1 unlisted.
CAS# 0-03-3 unlisted.
CAS# 92-71-7: RP6825000 CAS# 111-42-2: KL2975000 CAS# 112-34-5: KJ9100000 CAS# 16940-66-2: ED3325000 LD50/LC50:
Not available.
Not available.
Not available.
Not available.
Not available.
CAS# 111-42-2: Dermal, guinea pig: LD50 = 11900 uL/kg; Draize test, rabbit, eye: 5500 mg Severe; Draize test, rabbit, eye: 750 ug/24H Severe; Draize test, rabbit, skin: 500 mg/24H Mild; Oral, mouse: LD50 = 3300 mg/kg; Oral, rabbit: LD50 = 2200 mg/kg; Oral, rat: LD50 = 620 uL/kg; Skin, rabbit: LD50 = 7640 uL/kg.
CAS# 112-34-5: Draize test, rabbit, eye: 20 mg Severe; Draize test, rabbit, eye: 20 mg/24H Moderate; Oral, mouse: LD50 = 2400 mg/kg; Oral, mouse: LD50 = 6050 mg/kg; Oral, rabbit: LD50 = 2200 mg/kg; Oral, rat: LD50 = 5660 mg/kg; Oral, rat: LD50 = 4500 mg/kg; Skin, rabbit: LD50 = 2700 mg/kg.
CAS# 16940-66-2: Inhalation, rat: LC50 = 36 mg/m3; Oral, mouse: LD50 = 50 mg/kg; Oral, rabbit: LD50 = 50 mg/kg; Oral, rat: LD50 = 162 mg/kg; Skin, rabbit: LD50 = 230 mg/kg.
CAS# 112-34-5 Oral rat LD50=1746=10502 Carcinogenicity:
Propylene glycol monobutyl ether - Not listed by ACGIH, IARC, or NTP.
Lauroyl sarcosine acid form - Not listed by ACGIH, IARC, or NTP.
4-Di-(2-methylstyryl) benze(bis-MSB) - Not listed by ACGIH, IARC, or NTP.
Sodium di-iso-octylsulfosuccinate - Not listed by ACGIH, IARC, or NTP.
OptiPhase Hisafe 2 - Not listed by ACGIH, IARC, or NTP.
Diethanolamine - Not listed by ACGIH, IARC, or NTP.
Diethylene glycol monobutyl ether - Not listed by ACGIH, IARC, or NTP.
Sodium borohydride - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Ecotoxicity:
No data
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
USA RQ: CAS# 111-42-2: 100 lb final RQ; 45.4 kg final RQ
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/38 Irritating to eyes and skin.
Safety Phrases:
S 28 After contact with skin, wash immediately
with...
WGK (Water Danger/Protection)
CAS# 0-00-4: No information available.
CAS# 0-00-6: No information available.
CAS# 0-01-1: No information available.
CAS# 0-03-3: No information available.
CAS# 92-71-7: No information available.
CAS# 111-42-2: 1
CAS# 112-34-5: 1
CAS# 16940-66-2: 2
Canada
CAS# 92-71-7 is listed on Canadas DSL List.
CAS# 111-42-2 is listed on Canadas DSL List.
CAS# 112-34-5 is listed on Canadas DSL List.
CAS# 16940-66-2 is listed on Canadas DSL List.
CAS# 0-00-4 is not listed on Canadas Ingredient Disclosure List.
CAS# 0-00-6 is not listed on Canadas Ingredient Disclosure List.
CAS# 0-01-1 is not listed on Canadas Ingredient Disclosure List.
CAS# 0-03-3 is not listed on Canadas Ingredient Disclosure List.
CAS# 92-71-7 is not listed on Canadas Ingredient Disclosure List.
CAS# 111-42-2 is listed on Canadas Ingredient Disclosure List.
CAS# 112-34-5 is listed on Canadas Ingredient Disclosure List.
CAS# 16940-66-2 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-4 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 0-00-6 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 0-01-1 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 0-03-3 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 92-71-7 is listed on the TSCA inventory.
CAS# 111-42-2 is listed on the TSCA inventory.
CAS# 112-34-5 is listed on the TSCA inventory.
CAS# 16940-66-2 is listed on the TSCA inventory.