英文MSDS库
当前位置:化工字典 > 英文MSDS
Name:
p-Anisaldehyde 99+%
Synonym:
4-Methoxybenzaldehyde; Anisic aldehyde; p-Methoxybenzaldehyde; p-Formylanisole
CAS:
123-11-5
Section 1 - Chemical Product
MSDS Name:p-Anisaldehyde 99+%
Synonym:4-Methoxybenzaldehyde; Anisic aldehyde; p-Methoxybenzaldehyde; p-Formylanisole
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name emsds EINECS#
123-11-5 p-Anisaldehyde > 99 204-602-6
Hazard Symbols: XN
Risk Phrases: 22 36/37/38

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful if swallowed. Irritating to eyes, respiratory system and skin.Air sensitive.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation. Prolonged or repeated contact may dry/defat the skin and cause irritation.
Ingestion:
May cause irritation of the digestive tract. May be harmful if swallowed.
Inhalation:
May cause respiratory tract irritation.
Chronic:
Laboratory experiments have resulted in mutagenic effects.

Section 4 - FIRST AID MEASURES
Eyes: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Get medical aid.
Skin:
In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.
Ingestion:
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Treat symptomatically and supportively.

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Clean up spills immediately, observing precautions in the Protective Equipment section.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Avoid breathing vapor or mist.
Storage:
Do not store in direct sunlight. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Storage under a nitrogen blanket has been recommended.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 123-11-5: Personal Protective Equipment Eyes: Wear chemical splash goggles.
Skin:
Wear appropriate protective gloves and clothing to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHAs 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: colorless to slight yellow
Odor: sweetish odor
pH: Not available.
Vapor Pressure: 3.29E-002 mm Hg @ 25 deg C
Viscosity: Not available.
Boiling Point: 248 - 249 deg C @ 760mmHg
Freezing/Melting Point: -1 deg C
Autoignition Temperature: 225 deg C ( 437.00 deg F)
Flash Point: 116 deg C ( 240.80 deg F)
Explosion Limits, lower: 1.4 vol %
Explosion Limits, upper: 5.3 vol %
Decomposition Temperature: >160 deg C
Solubility in water: Insoluble.
Specific Gravity/Density: 1.1190g/cm3
Molecular Formula: C8H8O2
Molecular Weight: 136.15

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Prolonged exposure to air.
Incompatibilities with Other Materials:
Strong bases, strong oxidizing agents, strong reducing agents.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 123-11-5: BZ2625000 LD50/LC50:
CAS# 123-11-5: Draize test, rabbit, skin: 500 mg/24H Moderate; Oral, mouse: LD50 = 1859 mg/kg; Oral, mouse: LD50 = 1858.6 mg/kg; Oral, rat: LD50 = 1510 mg/kg; Oral, rat: LD50 = 1847.8 mg/kg; Skin, rabbit: LD50 = >5 gm/kg.
Carcinogenicity:
p-Anisaldehyde - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.

Section 12 - ECOLOGICAL INFORMATION

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
IMO
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing Group:
RID/ADR
Shipping Name: Not regulated.
Hazard Class:
UN Number:
Packing group:

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 23 Do not inhale gas/fumes/vapour/spray.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 123-11-5: 1
Canada
CAS# 123-11-5 is listed on Canadas DSL List.
CAS# 123-11-5 is listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 123-11-5 is listed on the TSCA inventory.