Name:
Palladium on Barium Sulfate Reduced (5% Pd)
Section 1 - Chemical Product
MSDS Name:Palladium on Barium Sulfate Reduced (5% Pd)
Synonym:None
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7440-05-3 | Palladium | 5 | 231-115-6 |
Hazard Symbols: None Listed. Risk Phrases: None Listed. |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
Dust may cause mechanical irritation.
Skin:
Dust may cause mechanical irritation.
Ingestion:
No hazard expected in normal industrial use.
Inhalation:
No hazard expected in normal industrial use.
Chronic:
Repeated exposure may cause baritosis characterized by deposition of particulate matter in the lung.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Material will not burn.
Extinguishing Media:
Use extinguishing media most appropriate for the surrounding fire.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Provide ventilation.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid breathing dust.
Storage:
Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 7440-05-3: CAS# 7727-43-7: United Kingdom, WEL - TWA: 10 mg/m3 TWA (inhalable dust); 4 mg/m3 (respirable dust) United Kingdom, WEL - STEL: 30 mg/m3 STEL (inhalable dust); 12 mg STEL (respirable dust) United States OSHA: 15 mg/m3 TWA (total dust); 5 mg/m3 TWA (respirable fraction) Belgium - TWA: 10 mg/m3 VLE Malaysia: 10 mg/m3 TWA (particulate matter containing no asbestos <1% crystalline sili Netherlands: 1.5 mg/m3 MAC (respirable dust); 4 mg/m3 MAC (inhala dust) Spain: 10 mg/m3 VLA-ED (this value is for the particulated matter that is free from asb Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear impervious gloves.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Powder
Color: white
Odor: odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: N/A
Explosion Limits, upper: N/A
Decomposition Temperature: >999 deg C
Solubility in water: insoluble
Specific Gravity/Density:
Molecular Formula: Not applicable.
Molecular Weight:
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Aluminum + heat.
Hazardous Decomposition Products:
Oxides of sulfur, barium fume.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7440-05-3: RT3480500 RT3593400 CAS# 7727-43-7: CR0600000 CR0630000 LD50/LC50:
Not available.
Not available.
Carcinogenicity:
Palladium - Not listed by ACGIH, IARC, or NTP.
Barium sulfate - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Other No information available.
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 22 Do not breathe dust.
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 7440-05-3: 0
CAS# 7727-43-7: 0
Canada
CAS# 7440-05-3 is listed on Canadas DSL List.
CAS# 7727-43-7 is listed on Canadas DSL List.
CAS# 7440-05-3 is not listed on Canadas Ingredient Disclosure List.
CAS# 7727-43-7 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7440-05-3 is listed on the TSCA inventory.
CAS# 7727-43-7 is listed on the TSCA inventory.