Name:
Potassium superoxide (chunks)
Section 1 - Chemical Product
MSDS Name:Potassium superoxide (chunks)
Synonym:
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 12030-88-5 | Potassium superoxide | 100.0 | 234-746-5 |
Hazard Symbols: O C Risk Phrases: 34 8 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns. Contact with combustible material may cause fire.
Potential Health Effects
Eye:
Contact with eyes may cause severe irritation, and possible eye burns.
Skin:
May cause severe skin irritation and burns.
Ingestion:
May cause severe gastrointestinal tract irritation with nausea, vomiting and possible burns.
Inhalation:
May cause severe respiratory tract irritation and possible burns.
Chronic:
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Strong oxidizer. Contact with other material may cause fire. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Containers may explode when heated.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Cool containers with flooding quantities of water until well after fire is out. For small fires, do NOT use dry chemicals, carbon dioxide, halon or foams. USE WATER ONLY.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Use water spray to disperse the gas/vapor.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 12030-88-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 400 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: KO2
Molecular Weight: 71.10
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, carbon, 2-aminophenol + tetrahydrofuran, acids (mineral, non-oxidizing, e.g. hydrochloric acid, hydrofluoric acid, muriatic acid, phosphoric acid), acids (organic, e.g. acetic acid, benzoic acid, formic acid, methanoic acid, oxalic acid), alcohols and glycols (e.g. butyl alcohol, ethanol, methanol, ethylene glycol), aldehydes (e.g. acetaldehyde, acrolein, chloral hydrate, formaldehyde), amides (e.g. butyramide, diethyltoluamide, dimethyl formamide), amines (aliphatic and aromatic, e.g. dimethyl amine, propylamine, pyridine, triethylamine), azo, diazo, and hydrazines (e.g. dimethyl hydrazine, hydrazine, methyl hydrazine), carbamates (e.g. carbanolate, carbofuran), cyanides (e.g. potassium cyanide, sodium cyanide), dithiocarbamates (e.g. ferbam, maneb, metham, thiram), esters (e.g. butyl acetate, ethyl acetate, propyl formate), ethers (e.g. dioxane, furfuran, tetrahydrofuran (THF)), hydrocarbons (aromatic, e.g. benzene, chrysene, cumene, toluene), halogenated organics (e.g. dibromoethane, hexachlorobenzene, methyl chloride, trichloroethylene), isocyanates (e.g. methyl isocyanate), ketones (e.g. acetone, acetophenone, MEK, MIBK), mercaptans and other organic sulfides (e.g. butyl mercaptan, carbon disulfide, methanethiol), metals (alkali and alkaline, e.g. cesium, potassium, sodium), metals as powders (e.g. hafnium, raney nickel), metals as non-powders (e.g.
brass, bronze, iron), nitrides (e.g. potassium nitride, sodium nitride), nitriles (e.g. acetonitrile, methyl cyanide), nitro compounds (organic, e.g. nitrobenzene, nitroglycerine, picric acid, trinitrotoluene), hydrocarbons (aliphatic, unsaturated, e.g.
cyclopentene, ethylene, heptene), hydrocarbons (aliphatic, saturated, e.g. butane, heptane, isooctane), peroxides and hydroperoxides (organic, e.g. acetyl peroxide, benzoyl peroxide, butyl peroxide, methyl ethyl ketone peroxide), phenols and cresols (e.g. carbolic acid, creosote, cresol, phenol, resorcinol), organophosphates, phosphothioates (e.g. m.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases.
Hazardous Polymerization: Not available.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 12030-88-5: TT6053000 LD50/LC50:
Not available.
Carcinogenicity:
Potassium superoxide - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: POTASSIUM SUPEROXIDE
Hazard Class: 5.1
UN Number: 2466
Packing Group: I
IMO
Shipping Name: POTASSIUM SUPEROXIDE
Hazard Class: 5.1
UN Number: 2466
Packing Group: I
RID/ADR
Shipping Name: POTASSIUM SUPEROXIDE
Hazard Class: 5.1
UN Number: 2466
Packing group: I
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: O C
Risk Phrases:
R 34 Causes burns.
R 8 Contact with combustible material may cause
fire.
Safety Phrases:
S 17 Keep away from combustible material.
S 25 Avoid contact with eyes.
S 28 After contact with skin, wash immediately
with...
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
WGK (Water Danger/Protection)
CAS# 12030-88-5: No information available.
Canada
CAS# 12030-88-5 is listed on Canadas NDSL List.
CAS# 12030-88-5 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 12030-88-5 is listed on the TSCA inventory.