Name:
Sodamide
Synonym:
Non
CAS:
0-00-0
Section 1 - Chemical Product
MSDS Name:Sodamide
Synonym:Non
Synonym:Non
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 0-00-0 |
| Hazard Symbols: F C Risk Phrases: |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Reacts violently with water liberating extremely flammable gases.
Causes burns.Corrosive.Water-reactive.Air sensitive.
Potential Health Effects
Eye:
May cause irreversible eye injury. Contact with eyes may cause severe irritation, and possible eye burns.
Skin:
Causes skin burns. May cause deep, penetrating ulcers of the skin.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion.
Reacts violently with water liberating extremely flammable gases.
Causes burns.Corrosive.Water-reactive.Air sensitive.
Potential Health Effects
Eye:
May cause irreversible eye injury. Contact with eyes may cause severe irritation, and possible eye burns.
Skin:
Causes skin burns. May cause deep, penetrating ulcers of the skin.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
May cause severe irritation of the respiratory tract with sore throat, coughing, shortness of breath and delayed lung edema.
Chronic:
Chronic inhalation and ingestion may cause effects similar to those of acute inhalation and ingestion.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Skin:
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Reacts violently with water giving off flammable gas which may explode. Flammable solid.
Extinguishing Media:
Do NOT use carbon dioxide. Use dry chemical to fight fire. Use alcohol foam. DO NOT USE WATER!
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Reacts violently with water giving off flammable gas which may explode. Flammable solid.
Extinguishing Media:
Do NOT use carbon dioxide. Use dry chemical to fight fire. Use alcohol foam. DO NOT USE WATER!
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Remove all sources of ignition.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Remove all sources of ignition.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not ingest or inhale. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep away from strong acids. Keep away from water.
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Do not ingest or inhale. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep away from strong acids. Keep away from water.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 0-00-0: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Exposure Limits CAS# 0-00-0: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Wear a NIOSH/MSHA or European Standard EN 149 approved full-facepiece airline respirator in the positive pressure mode with emergency escape provisions.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: white to gray white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 400 deg C
Freezing/Melting Point: 210 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Reacts violently with water
Specific Gravity/Density: Not available.
Molecular Formula: NaNH2
Molecular Weight: 39.0105
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, exposure to air, contact with water, oxidizers.
Incompatibilities with Other Materials:
Reacts violently with acids, water, halocarbons. Please refer to Fire Protection Guide to Hazardous materials for details.
Hazardous Decomposition Products:
Sodium oxide.
Hazardous Polymerization: Has not been reported.
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, moisture, exposure to air, contact with water, oxidizers.
Incompatibilities with Other Materials:
Reacts violently with acids, water, halocarbons. Please refer to Fire Protection Guide to Hazardous materials for details.
Hazardous Decomposition Products:
Sodium oxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 0-00-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sodamide - Not listed by ACGIH, IARC, or NTP.
CAS# 0-00-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sodamide - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: ALKALI METAL AMIDES
Hazard Class: 4.3
UN Number: 1390
Packing Group: II
IMO
Shipping Name: ALKALI METAL AMIDES
Hazard Class: 4.3
UN Number: 1390
Packing Group: II
RID/ADR
Shipping Name: ALKALI METAL AMIDES
Hazard Class: 4.3
UN Number: 1390
Packing group: II
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: F C
Risk Phrases:
R 14/15 Reacts violently with water liberating
extremely flammable gases.
R 34 Causes burns.
Safety Phrases:
S 8 Keep container dry.
S 36/37 Wear suitable protective clothing and
gloves.
WGK (Water Danger/Protection)
CAS# 0-00-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 0-00-0 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 0-00-0 is not listed on the TSCA inventory.
It is for research and development use only.
