Name:
Sodium Borodeuteride 98 Atom % D
Section 1 - Chemical Product
MSDS Name:Sodium Borodeuteride 98 Atom % D
Synonym:None Known
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 15681-89-7 | Sodium Borodeuteride | 98 Atom | 239-764-7 |
Hazard Symbols: T F Risk Phrases: 15 25 34 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Contact with water liberates extremely flammable gases. Toxic if swallowed. Causes burns.Hygroscopic (absorbs moisture from the air).Water-reactive.
Potential Health Effects
Eye:
Causes eye burns. When substance becomes wet or comes in contact with moisture of the mucous membranes, it will cause irritation. May cause lacrimation (tearing), blurred vision, and photophobia. May cause chemical conjunctivitis and corneal damage.
Skin:
Contact with skin causes irritation and possible burns, especially if the skin is wet or moist. May cause skin rash (in milder cases), and cold and clammy skin with cyanosis or pale color.
Ingestion:
May cause severe and permanent damage to the digestive tract. Causes gastrointestinal tract burns. May cause liver and kidney damage. May cause perforation of the digestive tract. May cause cardiac disturbances. May cause central nervous system depression. May cause systemic effects. May cause nausea, vomiting, abdominal pain, and increased salivation.
Inhalation:
May cause liver and kidney damage. Causes chemical burns to the respiratory tract. Aspiration may lead to pulmonary edema. May cause cardiac abnormalities. May cause systemic effects. Olfactory fatigue may occur. Inhalation at high concentrations may cause CNS depression and asphixiation.
Chronic:
May cause liver and kidney damage. Effects may be delayed.
Section 4 - FIRST AID MEASURES
Eyes: Get medical aid immediately. Do NOT allow victim to rub eyes or keep eyes closed. Extensive irrigation with water is required (at least 30 minutes).
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Destroy contaminated shoes.
If water-reactive products are embedded in the skin, no water should be applied. The embedded products should be covered with a light oil.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid immediately. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If breathing is difficult, give oxygen. Do NOT use mouth-to-mouth resuscitation. If breathing has ceased apply artificial respiration using oxygen and a suitable mechanical device such as a bag and a mask.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Reacts violently with water giving off flammable gas which may explode. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Water Reactive. Material will react with water and may release a flammable and/or toxic gas. Dust can be an explosion hazard when exposed to heat or flame. Flammable solid. May ignite or explode on contact with steam or moist air. May burn rapidly with flare burning effect.
May re-ignite after fire is extinguished. Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
Use dry sand or earth to smother fire. DO NOT USE WATER! Do NOT get water inside containers. Contact professional fire-fighters immediately. For small fires, use dry chemical, carbon dioxide, sand, earth, water spray or regular foam. Cool containers with flooding quantities of water until well after fire is out. For large fires, use dry sand, dry chemical, soda ash or lime or withdraw from area and let fire burn.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Clean up spills immediately, observing precautions in the Protective Equipment section. Scoop up with a nonsparking tool, then place into a suitable container for disposal. Avoid generating dusty conditions. Remove all sources of ignition. Provide ventilation. Do not expose spill to water.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Do not allow water to get into the container because of violent reaction. Minimize dust generation and accumulation. Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous.
Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Do not ingest or inhale. Do not allow contact with water. Discard contaminated shoes. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep from contact with moist air and steam.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Keep container closed when not in use. Water free area.
Store protected from moisture.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 15681-89-7: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: white
Odor: None reported.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 300 deg C
Autoignition Temperature: 400 deg C ( 752.00 deg F)
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: BD4Na
Molecular Weight: 41.86
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures. Combines vigorously or explosively with water.
Conditions to Avoid:
Incompatible materials, ignition sources, dust generation, excess heat, strong oxidants, exposure to moist air or water.
Incompatibilities with Other Materials:
Contact with water liberates highly flammable gases., strong oxidizing agents, acids, alcohols, moisture, water.
Hazardous Decomposition Products:
Irritating and toxic fumes and gases, oxides of boron, borane.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 15681-89-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Sodium Borodeuteride - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: SODIUM BOROHYDRIDE
Hazard Class: 4.3
UN Number: 1426
Packing Group: I
IMO
Shipping Name: SODIUM BOROHYDRIDE
Hazard Class: 4.3
UN Number: 1426
Packing Group: I
RID/ADR
Shipping Name: SODIUM BOROHYDRIDE
Hazard Class: 4.3
UN Number: 1426
Packing group: I
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T F
Risk Phrases:
R 15 Contact with water liberates extremely
flammable gases.
R 25 Toxic if swallowed.
R 34 Causes burns.
Safety Phrases:
S 7/8 Keep container tightly closed and dry.
S 28A After contact with skin, wash immediately with
plenty of water.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 15681-89-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 15681-89-7 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 15681-89-7 is not listed on the TSCA inventory.
It is for research and development use only.