Name:
Sodium periodate reagent acs
Section 1 - Chemical Product
MSDS Name:Sodium periodate reagent acs
Synonym:
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7790-28-5 | SODIUM PERIODATE | 100.0 | 232-197-6 |
Hazard Symbols: XI O Risk Phrases: 36/37/38 8 |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin. Contact with combustible material may cause fire.Hygroscopic (absorbs moisture from the air).
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
May cause irritation of the digestive tract.
Inhalation:
Causes respiratory tract irritation.
Chronic:
Prolonged or repeated skin contact may cause dermatitis.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
If victim is conscious and alert, give 2-4 cupfuls of milk or water.
Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Strong oxidizer. Contact with other material may cause fire.
Extinguishing Media:
Use water spray to cool fire-exposed containers. Use water only! Cool containers with flooding quantities of water until well after fire is out. Do NOT use dry chemicals, CO2, Halon or foams.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Avoid generating dusty conditions. Provide ventilation.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Use with adequate ventilation.
Minimize dust generation and accumulation. Avoid contact with skin and eyes. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid contact with clothing and other combustible materials. Do not ingest or inhale. Keep from contact with clothing and other combustible materials. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Do not store near combustible materials. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 7790-28-5: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: white to off-white
Odor: Odorless
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 300 deg C
Autoignition Temperature: Not available.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: 300 deg C
Solubility in water: Soluble.
Specific Gravity/Density:
Molecular Formula: INaO4
Molecular Weight: 213.89
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable.
Conditions to Avoid:
Incompatible materials, combustible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Organic materials - reducing agents - acids - finely powdered metals - magnesium - ammonium perchlorate - finely divided aluminium or magnesium hydrides.
Hazardous Decomposition Products:
Hydrogen iodide, sodium oxide, iodine.
Hazardous Polymerization: Will not occur.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7790-28-5: SD4550000 LD50/LC50:
Not available.
Not available.
Carcinogenicity:
SODIUM PERIODATE - Not listed by ACGIH, IARC, or NTP.
Other:
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: OXIDIZING SOLID, N.O.S.*
Hazard Class: 5.1
UN Number: 1479
Packing Group: II
IMO
Shipping Name: OXIDIZING SOLID, N.O.S.
Hazard Class: 5.1
UN Number: 1479
Packing Group: II
RID/ADR
Shipping Name: OXIDIZING SOLID, N.O.S.
Hazard Class: 5.1
UN Number: 1479
Packing group: II
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI O
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
R 8 Contact with combustible material may cause
fire.
Safety Phrases:
S 17 Keep away from combustible material.
WGK (Water Danger/Protection)
CAS# 7790-28-5: 1
Canada
CAS# 7790-28-5 is listed on Canadas DSL List.
CAS# 7790-28-5 is not listed on Canadas Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 7790-28-5 is listed on the TSCA inventory.