Name:
Sodium Selenate Solution 40.0% w/w
Synonym:
Non
CAS:
7732-18-5
Section 1 - Chemical Product
MSDS Name:Sodium Selenate Solution 40.0% w/w
Synonym:Non
Synonym:Non
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
| CAS# | Chemical Name | emsds | EINECS# |
| 7732-18-5 | Water | Balance | 231-791-2 |
| Hazard Symbols: T+ Risk Phrases: |
Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation.
Skin:
Causes skin irritation.
Ingestion:
Causes gastrointestinal irritation with nausea, vomiting and diarrhea.
Inhalation:
Causes respiratory tract irritation.
Chronic:
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure to fresh air immediately. Get medical aid.
Notes to Physician:
Skin:
Get medical aid immediately. Flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Call a poison control center. If swallowed, do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure to fresh air immediately. Get medical aid.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container.
Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Do not ingest or inhale. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Keep container closed when not in use.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible exposure limits.
Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHAs eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves and clothing to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Always use a NIOSH or European Standard EN 149 approved respirator when necessary.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Liquid
Color: not available
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Soluble in water.
Specific Gravity/Density:
Molecular Formula: Mixture
Molecular Weight: Not available.
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Combustible materials; strong reducing agents; finely powdered metals; moisture; strong bases; alcohols.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, strong oxidants.
Incompatibilities with Other Materials:
Combustible materials; strong reducing agents; finely powdered metals; moisture; strong bases; alcohols.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide, toxic fumes of sodium oxide.
Hazardous Polymerization: Has not been reported
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 7732-18-5: ZC0110000 CAS# 10102-23-5: VS6720000 LD50/LC50:
Not available.
Not available.
Carcinogenicity:
Water - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Sodium Selenate Decahydrate - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.
CAS# 7732-18-5: ZC0110000 CAS# 10102-23-5: VS6720000 LD50/LC50:
Not available.
Not available.
Carcinogenicity:
Water - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
Sodium Selenate Decahydrate - Not listed by ACGIH, IARC, NIOSH, NTP, or OSHA.
See actual entry in RTECS for complete information.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Products which are considered hazardous for supply are classified as Special Waste and the disposal of such chemicals is covered by regulations which may vary according to location. Contact a specialist disposal company or the local waste regulator for advice. Empty containers must be decontaminated before returning for recycling.
Section 14 - TRANSPORT INFORMATION
IATA
Shipping Name: SELENATES
Hazard Class: 6.1
UN Number: 2630
Packing Group: I
IMO
Shipping Name: SELENATES
Hazard Class: 6.1
UN Number: 2630
Packing Group: I
RID/ADR
Shipping Name: SELENATES
Hazard Class: 6.1
UN Number: 2630
Packing group:
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: T+
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 8 Keep container dry.
S 17 Keep away from combustible material.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 28 After contact with skin, wash immediately
with...
WGK (Water Danger/Protection)
CAS# 7732-18-5: No information available.
CAS# 10102-23-5: No information available.
United Kingdom Occupational Exposure Limits
United Kingdom Maximum Exposure Limits
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 7732-18-5 is not listed on Canadas Ingredient Disclosure List.
CAS# 10102-23-5 is not listed on Canadas Ingredient Disclosure List.
Exposure Limits
CAS# 10102-23-5: OEL-ARAB Republic of Egypt:TWA 0.2 mg(Se)/m3
OEL-AUSTRALIA:TWA 0.2 mg(Se)/m3
OEL-BELGIUM:TWA 0.2 mg(Se)/m3
OEL-DENMARK:TWA 0.1 mg(Se)/m3
OEL-FINLAND:TWA 0.1 mg(Se)/m3;STEL 0.3 mg(Se)/m3
OEL-GERMANY:TWA 0.1 mg(Se)/m3
OEL-HUNGARY:STEL 0.1 mg(Se)/m3
OEL-THE NETHERLANDS:TWA 0.2 mg(Se)/m3
OEL-THE PHILIPPINES:TWA 0.2 mg(Se)/m3
OEL-POLAND:TWA 0.1 mg(Se)/m3
OEL-SWEDEN:TWA 0.1 mg(Se)/m3
OEL-SWITZERLAND:TWA 0.1 mg(Se)/m3
OEL-TURKEY:TWA 0.2 mg(Se)/m3
OEL-UNITED KINGDOM:TWA 0.1 mg(Se)/m3
OEL IN BULGARIA, COLOMBIA, JORDAN, KOREA check ACGIH TLV
OEL IN NEW ZEALAND, SINGAPORE, VIETNAM check ACGI TLV
US FEDERAL
TSCA
CAS# 7732-18-5 is not listed on the TSCA inventory.
It is for research and development use only.
CAS# 10102-23-5 is not on the TSCA Inventory because it is a hydrate.
It is considered to be listed if the CAS number for the anhydrous form
is on the inventory (40CFR720.3(u)(2)).
